Samsung POWERbot SR20J90 U Series User Manual page 23

f If "UP" is displayed on the display panel while the POWERbot is charging, it means that the update
is in progress. Please wait for completing the rebooting.
f If the product registration is not done, please follow the following instructions:
– Refer to the popup message and retry the registraion procedure.
– Check if the UPnP option of the wireless router is available and retry the registration procedure.
– Check if the operating mode of the wireless router is a router mode and retry the registration procedure.
– If you have more than two POWERbot, turn off the others to register the one. The connection must be one
to one.
f Samsung Smart Home Service does not guarantee a normal operation under firewall environment.
f If the POWERbot and smart phone are not connected to the same wireless router, response delay
may occur according to network environment.
f Smart control and Wi-Fi indicator
– On : Smart control is locked.
– Off : Smart control is allowed.
– Off : The POWERbot is connecting to the wireless router.
– On : The POWERbot is connected to the wireless router.
ENGLISH-23