Samsung RH68B Series User Manual page 42

Installation
Water filter replacement (applicable models only)
CAUTION
• Do not use third-party water filters. Use only Samsung-provided or -approved filters.
• Unapproved filters may leak and damage the refrigerator, causing electric shock.
Samsung holds no responsibility for any damage that may occur from use of third party
water filters.
• The water filter replacement icon (
water filter.
42 English
Untitled-1 42
CAUTION
Do not mount the water filter on any part
of the refrigerator. This may damage the
refrigerator.
) blinks to let you know it is time to replace the
1. Shut off the main water supply.
2. Connect the water supply line to the
inlet side of the filter to the end.
3. Connect the dispenser line to the outlet
side of the filter.
4. Check if there is any leak. If not, fix the
lines with the clips.
5. Put the water filter into place and fix it
with the clips.
6. Reset the water filter replacement
alarm. (For detailed instructions, see the
"Resetting or dismissing the water filter
replacement alarm" section on page 54.)
7. When replacing is complete, flush 10
litres of water (or dispense the water
for 6 - 7 minutes) to remove impurities
from the water line.
2022-03-25 6:06:33