✎
Installing or Removing an Expansion Card
Hardware Reference Guide
Installing a DIMM
A memory module can be installed in only one way. Match the notch
on the module with the tab on the memory socket.
5. Push the module down into the socket, ensuring that the module
is fully inserted and properly seated. Make sure the latches are in
the closed position 3.
6. Repeat steps 4 and 5 for to install any additional modules.
7. Replace the access panel.
8. If you normally lock the Smart Cover Lock, use Computer Setup
to relock the lock and enable the Smart Cover Sensor.
The computer should automatically recognize the additional memory
the next time you turn on the computer.
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
www.hp.com
Hardware Upgrades
2–11