HP Compaq d330 DT Hardware Reference Manual page 25

Ä
Hardware Reference Guide
7. If you are removing an AGP card from an AGP expansion socket
with a retention mechanism, pull the retention arm away from the
socket then carefully rock the card back and forth until the
connectors pull free from the socket. Lift the expansion card
straight up then pull it in toward the center of the chassis to
release it from the chassis frame. Be sure not to scrape the card
against other components.
Removing an AGP Card from a Socket with a Retention Mechanism
8. Store the removed card in anti-static packaging.
9. If you are not installing a new expansion card, install an
expansion slot cover to close the open slot.
CAUTION: After removing an expansion card, you must replace it with a
new card or cover the open slot (for example, with a metal slot cover or a
piece of duct tape) for proper cooling of internal components during
operation.
www.hp.com
Hardware Upgrades
2–15