Drive Positions - HP Compaq d330 DT Hardware Reference Manual

Hardware Upgrades

Drive Positions

2–18
Drive Positions
One standard 3.5-inch, one-third height bay (1.44-MB
1
diskette drive shown)*
Two internal 3.5-inch, one-third height bays for hard drives
2 3
Two 5.25-inch, half-height bays for optional drives
4 5
*Depending on the computer configuration, you may have a bezel
blank in this position. If you do not have a drive in this slot, you may
choose to install a 3.5-inch device (such as a diskette drive, hard
drive, or Zip drive) later on.
To verify the type and size of the storage devices installed in the
computer, run Computer Setup. Refer to the Computer Setup (F10)
Utility Guide on the Documentation Library CD for more
information.
www.hp.com Hardware Reference Guide