Table of Contents
Advertisement
4.Set up Instruction
On/Off
Power on
Turn on
Turn off (Restore to factory setting)
Power off
Note
Network Joining
Never joined the network
Had joined the network
(not restore to factory setting)
Fail to Join the Network
Function Key
Press the function key and hold the
pressing for 5 seconds
Press the function key once
Sleeping Mode
The device is turned on and in the
network
The device is on but not in
the network
Low Voltage Warning
Low Voltage
Insert batteries. (users may need a screwdriver to open the battery cover)
Press and hold the function key for 3 seconds till the green indicator flashes once.
Press and hold the function key for 5 seconds till green indicator flashes 20 times.
Remove Batteries.
1.The device will be off in default after removing the battery and insert it again.
2.It is suggested to wait for at least 10 seconds between turning the device on and off.
st
th
3.At 1
-5
second after power on, the device will be in engineering test mode.
Turn on the device, and it will search for the network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
Turn on the device, and it will search for the previous network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
1. Suggest to remove batteries if the device is not used to save power.
2. Suggest to check the device verification information on the gateway or consult your
platform server provider.
The device will be set to default and turned off
The green indicator light flashes 20 times: success
The green indicator light remains off: fail
The device is in the network: green indicator light flashes once and sends a report
The device is not in the network: green indicator light remains off
Sleep period: Min Interval.
When the reportchange exceeds setting value or the state changes: send a data report
according to Min Interval.
1. Suggest to remove batteries if the device is not used.
2. Suggest to check device verification on gateway.
3.2V
4
Advertisement
Table of Contents
