Set Up Instruction - netvox R718NL3 Series User Manual

4. Set up Instruction

On/Off
Power on
Turn on
Turn off (Restore to factory setting)
Power off
Note
Network Joining
If the device has never joined the
network
If the device has joined the network
and it is not set to default
If the device fails to join the network
(when the device is turned on)
Function Key
Press the function key and hold the
pressing for 5 seconds
Press the function key once
Sleeping Mode
The device is turned on and in the
network
The device is turned on but not in
the network
Low Voltage Warning
Low Voltage
Insert batteries. (users may need a flat blade screwdriver to open)
Press and hold the function key for 3 seconds till the green indicator flashes once.
Press and hold the function key for 5 seconds till green indicator flashes for 20 times.
Remove Batteries.
1.The device will be off after removing the battery and insert it again.
2.It is suggested to wait for at least 10 seconds between turning the device on and off.
st th
3.At 1 -5 second after power on, the device will be in engineering test mode.
Turn on the device, and it will search for the network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
Turn on the device, and it will search for the previous network to join.
The green indicator light stays on for 5 seconds: joins the network successfully
The green indicator light remains off: fail to join the network
For the first two minutes: the device will wake up every 15 seconds to send a join request.
After two minutes: the device will enter sleep mode and wake up every 15 minutes to send a join request.
Note: It is suggested to remove the batteries if the device is not in use to save power.
It is suggested to check the device verification information on the gateway
or consult your platform server provider when the device fails to join the network.
The device will be set to default and turned off
The green indicator light flashes for 20 times: success
The green indicator light remains off: fail
The device is in the network: green indicator light flashes once and sends a report
The device is not in the network: green indicator light remains off
Sleep period: Min Interval.
When the reportchange exceeds setting value or the state changes: send a data report according to Min Interval.
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send request.
Note: Suggest to remove batteries if the device is not used.
Suggest to check device verification on gateway.
3.2V
4