AT&T Nighthawk M6 Pro Let's Get Started

AT&T Eco Rating 2.0 only applies to the NETGEAR
Nighthawk M6 Pro. For limited factors evaluated visit
att.com/EcoSpace. Wireless Emergency Alerts is
a registered Trademark and Service Mark of CTIA.
NETGEAR and Nighthawk are trademarks of
NETGEAR, Inc. 5G is a trademark of 3GPP. 5G not
available everywhere. Contains Lithium ion
battery - recycle or dispose of properly.
© 2022 AT&T Intellectual Property. All rights
reserved. AT&T, the AT&T logo and all other
AT&T marks contained herein are trademarks
of AT&T Intellectual Property. All other marks are
the property of their respective owners.
Printed in USA
What's in the Box
• Nighthawk® M6 Pro
with pre-installed SIM card
• Battery cover
• Battery
• USB Type C cable
• AC adapter
Get to Know Your Mobile Hotspot
Antenna port
Install the Battery
1 Insert the battery.
2 Install the back cover.
3 To charge the battery, connect the USB
cable to the USB port and the AC adapter,
and plug the AC adapter into a power outlet.
Note: The mobile hotspot comes with a preinstalled SIM card.
The SIM must be activated on a data plan with AT&T.
201-28562-01
Touch screen
Home
Back
Antenna port
Ethernet port
USB Type C port
Power button
SIM card
(preinstalled)
Set Up Your Mobile Hotspot
You can use the mobile hotspot LCD screen
to change settings such as the WiFi password,
WiFi Manager login password, and WiFi
standby time.
1 Press and hold the Power button for 2
seconds.
To better safeguard your network, the first
time you turn on your mobile hotspot, you
are asked to set up your login credentials.
2 Follow the instructions to customize your
mobile hotspot settings.
Home Screen
The Home screen displays the mobile
hotspot's WiFi network name and password,
and the AT&T wireless network signal strength
and connection type.
Signal Network
strength connection type
WiFi network
name and
password
Use the battery or AC power
Rely on battery power when you're away from
home or the office. The Power Manager lets
you optimize battery life.
Your mobile hotspot can operate without the
battery. Remove the battery and plug the
provided AC adapter into a power outlet. Refer
to the user manual for more details.
Battery
QR code
for quick
connect to
WiFi