I
NSTALLATION
How to Install the Warmer
Before you begin
Requirements
Voltages
Position the warmer
26
you have:
Make sure
An appropriate lifting device and enough personnel to safely move and position
the weight of the warmer.
▪
The warmer must be installed on a level surface.
▪
The warmer must not be installed in any area where it may be affected by steam,
dripping water, high temperature, or any other severely adverse conditions.
Model
P-2420
18" Depth
P-2430
24" Depth
To position the warmer, do the following.
Step
Action
Make sure
1.
that:
The location where the warmer is being installed is rated to support the
▪
weight of the warmer;
The warmer is within five feet of the appropriate electrical outlet;
▪
You follow the warmer clearance guidelines. Refer to topic Specification
▪
Information for clearance requirements.
You reference the built-in specification page for cutout dimensions.
▪
Move
2.
the warmer to the installation location and onto the final resting
surface.
3.
Lock
the casters, if equipped.
The warmer is now correctly positioned.
V
Ph
120
1
220
1
230
1
120
1
220
1
230
1
C om b i n at i on W a rm e r
Op er a to r ' s Ma n u al
▪
Hz
kW
60
0.50
60
0.50
50/60
0.50
60
0.70
60
0.70
50/60
0.70
Continued on next page
M N- 47 4 2 4
Rev 1
4/ 2 1
▪
▪
▪