Sony XR85X90CK Help Manual page 78

Help Guide
No audio or low audio with a home theater system.
[53] Audio system (such as an AV receiver or sound bar) | Audio system (such as an AV receiver or
sound bar)
Adjusting an audio system
After connecting an audio system to the TV, adjust the TV's audio output from the audio system.
Adjusting an audio system connected with an HDMI cable or
digital optical cable
1
After connecting the TV to your audio system, press the
remote control, then select [Settings] — [Display & Sound] — [Audio output] —
[Speakers] — [Audio system].
2
Turn on the connected audio system, then adjust the volume.
If you connect a BRAVIA Sync-compatible device with an HDMI connection, you can operate it
by simply using the TV's remote control.
Note
You need to configure the [Digital audio out] settings according to your audio system. Press the
(Quick Settings) button on the remote control, then select [Settings] — [Display & Sound] —
[Audio output] — [Digital audio out].
If the audio system is not compatible with Dolby Digital or DTS, set [Settings] — [Display &
Sound] — [Audio output] — [Digital audio out] to [PCM].
The [Digital audio out] settings are disabled when using audio signals that are passed through
from the HDMI input and using eARC.
Hint
If a specific audio system is connected with an HDMI cable, you can adjust the output timing of
the picture and sound.
Adjusting the AV sync setting
For details about supported models, refer to the support site.
Support Site
print.html[2/23/2022 8:13:57 AM]
(Quick Settings) button on the
77