Sony XR85X90CK Help Manual page 128

Help Guide
Use the remote control when a microwave is not in use
Turn off other Bluetooth devices
Check the TV's Bluetooth setting and turn it on and off
Press the
If [Settings] — [Remotes & Accessories] — [Bluetooth] is disabled, enable it. If it is enabled,
disable and then enable it again.
Set wireless LAN access points and microwaves at least 10 m away from the TV
If the 5 GHz band (IEEE802.11a) is available in the wireless LAN, connect to the 5 GHz band
Pair the remote control again
Press the
[Settings] — [Remotes & Accessories] — [Remote control] — [Connect via Bluetooth] —
[Connect a new remote] — follow the on-screen instructions to reconnect the remote control.
If you cannot operate the TV with the supplied remote control, select the above in order until
[Connect a new remote] using another Sony TV's remote control, and then try connecting
again with the supplied remote control.
Depending on your model, a Bluetooth remote control is supplied and already paired with the
TV. At the time of shipment, the supplied paired remote control cannot be used to operate other
TVs. When checking remote control operation, use with the TV with which the remote control
was supplied.
Reset the remote control
If the remote control does not operate correctly due to poor battery contact or static electricity, the
problem may be resolved by resetting the remote control.
1
Remove the batteries from the remote control.
2
Press the power button on the remote control for three seconds.
3
Install new batteries into the remote control.
If the problem persists, refer to If a full reset (restart) of the TV is required and Frequently Asked
Questions for Troubleshooting pages.
Note
When you unplug the TV and plug it in again, the TV may not be able to turn on for a while, even
if you press the power button on the remote control or the TV. This is because it takes time to
initialize the system. Wait for about 10 to 20 seconds, then try again.
print.html[2/23/2022 8:13:57 AM]
(Quick Settings) button on the remote control and select the following in order.
(Quick Settings) button on the remote control and select the following in order.
127