Connecting Audio Devices To The Internal Connectors - HP Brio 8172 Online Manual

Connecting Audio Devices to the Internal Connectors

There are also several internal connectors located on the sound card itself. These are shown on
are used are described below.
AUX In Connector
This Auxiliary Connector allows you to connect an additional internal audio source such as a TV tuner, or another similar
card. It can also be used to accept decompressed audio data from an
following pin assignments:
Pin
CD Audio Connector
The CD Audio Connector, labeled "CDAUDIO", allows you to connect the sound card to the
cable, so that you can listen to audio from the CD-ROM drive. The CD Audio Connector has the following pin
assignments:
Pin
Signal
1 Analog Ground
2 AUX right channel
3 Analog Ground
4 AUX left channel
Signal
1 Analog Ground
2 CD right channel
3 Analog Ground
4 CD left channel
I/O
-
IN
-
IN
I/O
-
IN
-
IN
MPEG video card. The AUX In connector has the
CD-ROM
1 About Your Hardware
Your Sound Card
page 13 , and those that
drive via the audio
15