Connecting Audio Devices To The Internal Connectors - HP Brio 8300 Online Manual

Connecting Audio Devices to the Internal Connectors

There are also several internal connectors located on the sound card itself. These are shown on
are used are described below.
AUX In Connector
This Auxiliary In Connector allows you to connect an additional internal audio source such as a TV tuner, or other similar
card. It can also be used to accept decompressed audio data from an
following pin assignments:
Pin
1
2
3
4
CD Audio Connector
The CD Audio Connector, labeled "CDAUDIO", allows you to connect the sound card to the
cable, so that you can listen to audio from the CD-ROM drive. The CD Audio Connector has the following pin
assignments:
Pin
1
2
3
4
Signal I/O
Analog Ground -
AUX right channel IN
Analog Ground -
AUX left channel IN
Signal I/O
Analog Ground -
CD right channel IN
Analog Ground -
CD left channel IN
page 14
MPEG video card. The AUX In connector has the
CD-ROM
1 About Your Hardware
Your Sound Card
, and those that
drive via the audio
16