Table of Contents
Advertisement
Troubleshooting
If the new memory is not recognized, check that you have correctly followed the installation procedure described
above.
If there are any errors reported during the computer's startup routine, press
necessary action. If you have any doubts about using the Setup program, contact your reseller for help.
If you cannot start your computer properly, remove the memory and try starting your computer again. If the computer
now starts without any problems, there may be a problem with the new memory.
If you experience any other problems as a result of the upgrade, and your computer is supplied with the HP Brio Center,
refer to the support tools for further assistance.
Removing Video
If you need to remove a video memory module, a special tool (part number 5041-2553, available from your reseller) is
required. Insert this tool into the notched ends of the module and lever the module out.
Memory
3 Upgrading and Adding Accessories
Upgrading Hardware
to view the error(s) and take any
44
Advertisement
Table of Contents
