Table of Contents
Advertisement
5 Remove the metal cover plate on the shelf by bending it in and out until it breaks off. If necessary, use a flat-blade
screwdriver in the metal tab of the cover plate to help break the cover plate free.
6 Replace the front bezel on the computer.
7 Check that there are no mounting rails attached to the device. If there are mounting rails attached, remove them.
To avoid electric shock and hard to your eyes by laser light, do not open the laser module. The laser module should be
CD-ROM
serviced by service personnel only. Do not attempt to make any adjustment to the laser unit. Refer to the label on the
Warning
CD-ROM for power requirements and wavelength. This product is a class 1 laser product.
8 Insert the drive into the shelf from the front of the computer.
3 Upgrading and Adding Accessories
Bend the
Metal Cover
Plate In and
Out
Metal Tab
Adding Accessories
62
Advertisement
Table of Contents
