Troubleshooting; Service Data - Zanussi 944064892 User Manual

Table of Contents

Advertisement

When installed correctly the door trim clicks.
Make sure that you install the internal glass
panel in the seats correctly.
HOW TO REPLACE: LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.

SERVICE DATA

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the
oven cavity. Do not remove the rating plate from the oven cavity.
14
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
Step 2
mains.
Problem
The door gasket is
damaged.
The lamp does not
work.
Step 3
Put a cloth on the bottom of
the cavity.
Check if...
Do not use the oven.
Contact an Author-
ised Service Centre.
The lamp is burnt
out.
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zzb30401xk

Table of Contents