Gui Settings; Exposure - JVC KY-PZ400NWE Instructions Manual

GUI Settings

Menu
Pressing the [MENU] button on the infrared remote
control unit displays the main menu on the
HDMI/SDI and streaming screens. You can move
the cursor using the arrow buttons. Use the
[HOME] button to enter the corresponding menu.
.
Memo :
To display the menu on the video image on the
0
View Remote screen, configure [Encode
Codec] of [First Stream] or [Second Stream] to
"H.264". If the menu display is too small,
increase the [Resolution] for [First Stream] or
[Second Stream] accordingly.

Exposure

Mode
For selecting the method for controlling the
exposure.
Auto
0
Gain/Shutter/Iris are adjusted automatically.
Manual
0
Gain/Shutter/Iris operate according to the menu
setting.
SAE
0
Shutter speed is configured according to the
setting in the [Shutter] menu, while gain and iris
is automatically adjusted.
AAE
0
Iris is configured according to the setting in the
[Iris], while gain and shutter speed are
automatically adjusted.
Bright
0
Adjusts the brightness of the RAW data.
[Setting Values: RAuto, Manual, SAE, AAE, Bright]
ExpCompMode
Performs exposure compensation when this is
configured to "On".
[Setting Values: ROff, On]
Memo :
This item can be configured when [Mode] is set
0
to "Auto".
9 ExpComp
Adjusts the exposure compensation value.
[Setting Values: -7 to +7 (R0)]
Memo :
This item can be configured when
0
[ExpCompMode] is set to "On".
Backlight
For configuring backlight compensation.
[Setting Values: ROff, On]
Memo :
This item can be configured when [Mode] is set
0
to "Auto".
39
GUI Settings