Image; P/T/Z (P/T/Z) - JVC KY-PZ400NWE Instructions Manual

Image

Luminance
For adjusting the brightness.
[Setting Values: 0 to 14 (R7)]
* When [Style] is set to a value other than "Bright"
[Setting Values: 0 to 14 (R8)]
* When [Style] is set to "Bright"
Contrast
For adjusting the contrast.
[Setting Values: 0 to 14 (R7)]
* When the [Style] item is configured to "Default"
or "Norm"
[Setting Values: 0 to 14 (R9)]
* When the [Style] item is configured to "Bright" or
"PC"
Sharpness
Adjusts the outline correction value.
[Setting Values: 0 to 11 (R6)]
* When the [Style] item is configured to "Default"
or "Norm"
[Setting Values: 0 to 11 (R7)]
* When the [Style] item is configured to "Bright" or
"PC"
Flip-H
Flips the video image in the horizontal direction.
[Setting Values: ROff, On]
Flip-V
Flips the video image in the vertical direction.
[Setting Values: ROff, On]
B&W Mode
Switches the video to a grayscale display.
[Setting Values: ROff, On]
Style
For configuring the picture quality adjustment
mode.
[Setting Values: RDefault, STD, Bright, PC]
Memo :
The settings will not be reset even when you
0
press the RESTORE switch.
42
Image

P/T/Z (P/T/Z)

SpeedByZoom
Configuring to "On" reduces the speed of pan/tilt
movement further as the camera zooms toward the
Tele-end.
[Setting Values: ROn, Off]
AF-Zone
For configuring the auto focus reference area.
[Setting Values: RCenter, Bottom, Front, Top]
AF-Sense
Adjusts the auto focus sensitivity level.
[Setting Values: RHigh, Low, STD]
L/R Set
Inverts the pan operation.
STD : Use the Right cursor button to move to
the right, and the Left button to move to
the left
REV : Use the Right cursor button to move to
the left, and the Left button to move to
the right
[Setting Values: RSTD, REV]
Display Info
Configuring to "On" shows a "Registration is
complete" OSD when you have registered a preset
position.
[Setting Values: ROn, Off]
Image Freeze
Setting to "On" displays the video image before
movement starts as a still image during the interval
after preset starts until the camera has reached the
registered position.
[Setting Values: ROff, On]
Digital Zoom
For configuring the digital zoom factor.
[Setting Values: ROff, 2x, 4x, 8x, 16x]
Call Preset Speed
For configuring the preset pan/tilt speed.
[Setting Values: 1 to 24 (R20)]
Pre Zoom Speed
For configuring the preset zoom speed.
[Setting Values: 0 to 7 (R5)]