View Remote Screen - JVC KY-PZ400NWE Instructions Manual

View Remote Screen

A
B
C
D
F
H
I
L
N
O
P
.
Memo :
Some menu items may not be configurable
0
depending on the operating mode and status of
the camera.
A Live
Displays the camera's video image.
Memo :
Audio is not output.
0
Supports full-screen display.
0
To display the menu on the live screen,
0
configure [Encode Codec] of [First stream] or
[Second stream] to "H.264". If the menu display
is too small, increase the [Resolution] for [First
stream] or [Second stream] accordingly.
B Settings menu selection switch
Displays the different settings menus.
C Pan/tilt, menu control and HOME buttons
Moves the camera in one of the H IJK
directions.
Pressing the HOME button restores the pan, tilt
and zoom positions to the default setting.
If the camera menu is open, move the cursor
using H IJK, followed by pressing the HOME
button to confirm.
Memo :
Selecting "OSD" at O Pan/tilt operation/
0
Camera menu call-up enables camera menu
operation. Selecting "PTZ" enables the camera
operation.
D Zoom In button
Moves the zoom toward the Tele-end.
E Zoom Out button
Moves the zoom toward the Wide-end.
F Focus In button
Moves the focus toward the Tele-end when the
camera is in the manual focus mode.
G Focus Out button
Moves the focus toward the Wide-end when the
camera is in the Manual Focus mode.
H Horizontal speed control
For configuring the speed of horizontal
movement.
[Setting Values: 1 to R 10 to 24]
I Vertical speed control
For configuring the speed of vertical movement.
E
[Setting Values: 1 to R 10 to 20]
G
J Zoom speed control
J
For specifying the zooming speed.
K
[Setting Values: 1 to R 5 to 7]
M
K Focus speed control
For setting the focusing speed.
[Setting Values: 1 to R 5 to 7]
L Preset button
Q
Saves the current pan/tilt/zoom position to the
R
S preconfigured preset number.
M Preset number
After configuring the preset number, pressing
L Preset button saves the pan/tilt/zoom
position. Pressing N Preset Call button moves
the camera to the saved pan/tilt/zoom position.
[Setting Values: 1 to 255]
N Preset Call button
Calls up the corresponding pan/tilt/zoom
position using a preset number.
Memo :
The camera will not move if a pan/tilt/zoom
0
position is not stored in the selected preset
number.
O Pan/tilt operation/ Camera menu call-up
Selecting "OSD" displays the camera menu on
the live video of the web browser, streaming
video and HDMI (SDI) screen.
You can use the buttons in C to move the menu
cursor and confirm a selection.
Selecting "PTZ" closes the camera menu. You
can use the buttons in C for pan/tilt operation.
P Back button
Returns to the next higher level in the menu
during menu operation.
Q Focus mode
Switches between Auto Focus and Manual
Focus.
R Streaming button
Switches streaming to on or off.
S Language button
For configuring the display language on the web
screen.
[Setting Values: REnglish, Français, Deutsch,
Italiano, Español, русский, 中文(簡), 日本語]
View Remote Screen
27