Table of Contents
Advertisement
UK PLUG REPLACEMENT
The fuse in the main plug of your power tool should
always be replaced with one of identical rating.
Check the voltage given on your power tool matches
the supply voltage.
The power tool is supplied with a fitted plug, however if
you should need to fit a new plug follows the
instruction below.
IMPORTANT
The wire in the mains lead are coloured in accordance
with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected to
the terminal that is marked with the letter N. The wire
that is coloured brown must be connected to the
terminal that is marked with the letter L.
A 13 AMP (BS1363 or BS1363/A) plug must be used and
a 13 AMP fuse must be fitted.
BLUE
N (NEUTRAL)
OUTER
SLEEVE
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
Advertisement
Table of Contents
