Gb San Switch Management Features - HP StorageWorks Brocade User Manual

When running IP over FC, these management tools must be run on both the Fibre Channel
host and the switch and must be supported by the Fibre Channel host driver. For a list of
Fibre Channel hosts supported by the 4Gb SAN Switch, contact your HP representative.
Table 8 4Gb SAN Switch management features
Management tool
CLI — Run up to two admin
sessions and four user
sessions simultaneously. For
more information, refer to
the latest version of the HP
StorageWorks Fabric OS
administrator guide and
the Fabric OS command
reference guide.
Advanced Web Tools —
For information, refer to
the latest version of the
Fabric OS Web Tools
administrator's guide.
Standard SNMP
applications — For
information, refer to the
latest version of the Fabric
OS MIB reference guide.
Management Server — For
more information, refer to
the latest version of the HP
StorageWorks Fabric OS
administrator guide and
the Fabric OS command
reference guide.
You can connect a management station to one switch via Ethernet while managing other
switches connected to the first switch via FC. To do so, set the FC gateway address of
each of the other switches to be managed to the FC IP address of the first switch.
The gateway address of the first switch should be set to whatever the gateway address is
for the subnet on which the first switch resides. See
42
Managing the 4Gb SAN Switch
Out-of-band support
Ethernet or serial connection
Ethernet connection
Ethernet connection
Ethernet connection
In-band support
IP over FC
IP over FC
IP over FC
SMI-S compliant
management program
Table 9.