Table of Contents
Advertisement
Configure the 4Gb SAN Switch
The 4Gb SAN Switch must be configured to ensure correct operation within a network
and fabric. For instructions about configuring the switch to operate in a fabric containing
switches from other vendors, refer to the HP StorageWorks SAN Design reference guide:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html.
For more information about the CLI, refer to the latest version of the Fabric OS command
reference guide.
Items required for configuration
The following items are required for configuring and connecting the 4Gb SAN Switch
for use in a network and fabric:
•
4Gb SAN Switch installed in the enclosure
•
IP address and corresponding subnet mask and gateway address recorded
during the
•
Ethernet cable
•
SFP transceivers and compatible optical cables, as required
•
Access to an FTP server for backing up the switch configuration (optional)
Set the IP address
procedure
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
31
Advertisement
Table of Contents
