HP StorageWorks Brocade Specifications page 14

QuickSpecs
Technical Specifications
Vibration Vibration Vibration Vibration
Shock Shock Shock Shock
EMI EMI EMI EMI
Safety Safety Safety Safety
Fibre Channel Standards Fibre Channel Standards Fibre Channel Standards Fibre Channel Standards
And Revisions And Revisions And Revisions And Revisions
Altitude Altitude Altitude Altitude
Operating
Non-operating
Operating
Non-operating
CFR 47 Subpart B of Part 15 of the FCC Rules, Class A level
CISPR22 Class A
EN55022 Class A
VCCI Class A ITE
AS/NZS 3548 Class A
CNS 13438 Class A
EMC Directive (89/336/EEC) for CE Marking in European Union
Underwriters Laboratories, UL60950
Canadian Standards Association, CSA60950
TUV Rheinland of North America, EN60950
Nemko, EN60950
Low Voltage Directive (73/23/EEC) for CE Marking in European Union
FC-AL ANSI X3.272: 1996
FC-AL-2 INCITS 332: 1999
FC-GS-5 Rev 8.2 (under development, includes the following)
FC-GS-4 ANSI INCITS 387: 2004
FC-GS-3 ANSI INCITS 348: 2001
FC-GS-2 ANSI INCITS 288: 1999
FC-SW-4 Rev 7.7 (under development, includes the following)
FC-SW-3 INCITS 384: 2004
FC-SW-2 INCITS 355: 2001
FC-SW INCITS 321: 1998
FC-VI INCITS 357: 2002
FC-TAPE INCITS TR-24: 1999
FC-DA INCITS TR-36: 2004 (includes the following)
FC-FLA INCITS TR-20: 1998
FC-PLDA INCIT S TR-19: 1998
FC-SP Rev 1.73 (under development)
FC-MI-2 ANSI/INCITS TR-39-2005
FC-PI INCITS 352: 2002
FC-PI-2 INCITS 404: 2005
FC-FS-2 Rev 0.9 (under development, includes the following)
FC-FS INCITS 373: 2003
DA - 12480 Worldwide — Version 9 — July 13, 2007
Brocade 4Gb SAN Switch for HP c-Class BladeSystem Brocade 4Gb SAN Switch for HP c-Class BladeSystem Brocade 4Gb SAN Switch for HP c-Class BladeSystem Brocade 4Gb SAN Switch for HP c-Class BladeSystem
Operating
Non-operating
1 G, 10-500 Hz, 60 minutes per axis
2 G, 10-500 Hz, 30 minutes
Half-sine-wave shock, 40 G, 2 ms duration, in each direction of three
mutually perpendicular axes.
Half-sine-wave shock, 140 G, 2 ms duration, in each direction of three
mutually perpendicular axes; and square-wave shock up to 80 G, 180
inches/s velocity change, in each direction of three mutually perpendicular
axes.
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Page 14