Connectors; Twisted-Pair; Fiber-Optic - HP ProCurve J4862A Install Manual

Connectors

Twisted-Pair

10/100Base-TX RJ-45 – On the 10/100-TX GL Module.
■
They are compatible with the IEEE 802.3 10Base-T and 802.3u 100Base-
TX standards and accept the 10 Mbps or 100 Mbps cables listed below.
■ 100/1000Base-T RJ-45 – On the 100/1000-T GL Module and the
100/1000-T Transceiver.
They are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab
1000Base-T standards, and accept the 100 Mbps or 1000 Mbps cables listed
on the next page.

Fiber-Optic

100Base-FX SC – On the 100-FX SC Transceiver.
■
■ 100Base-FX MTRJ – On the 100-FX GL Module.
Both 100Base-FX connectors transmit at 1300 nm wavelength, and are
compatible with the IEEE 802.3u 100Base-FX standard. They accept the
multimode fiber-optic cables for 100Base-FX described on page 23.
Gigabit-SX SC – On the Gigabit-SX Transceiver.
■
Gigabit-SX LC – On the Gigabit-SX mini-GBIC.
■
Both Gigabit-SX connectors transmit at 850 nm wavelength, and are
compatible with the IEEE 802.3z Gigabit-SX standard. They accept the
low metal content, multimode fiber-optic cables for Gigabit-SX described
on page 23.
Gigabit-LX SC – On the Gigabit-LX Transceiver.
■
■ Gigabit-LX LC – On the Gigabit-LX mini-GBIC.
Both Gigabit-LX connectors transmit at 1300 nm wavelength, and are
compatible with the IEEE 802.3z Gigabit-LX standard. They accept the
low metal content, single-mode or multimode fiber-optic cables for
Gigabit-LX described on page 23.
■ Gigabit-LH LC – On the Gigabit-LH mini-GBIC.
Transmits at 1300 nm wavelength, and accepts the low metal content,
single-mode fiber-optic cables for Gigabit-LH described on page 23.
Specifications
21