HP Procurve Switch
GL Module (J4892A)
This module requires switch software version G.07.01 or later to be installed in the switch.
Link and Mode LEDs
(one pair per port)
Contact your HP-authorized networking products reseller or your HP repre
sentative for information on availability of other modules, transceivers, and
mini-GBICs. You can also visit the HP networking products Web site at
http://www.hp.com/go/hpprocurve to get more information.
Example: The HP Procurve 24-Port 10/100-TX GL Module
The HP Procurve Switch GL Modules have the following features:
auto-enabled ports—the ports are all configured to be ready for network
operation as soon as a viable network cable is connected.
auto-configuration—a default configuration is applied to the module
when the switch is powered on and the module passes self test; this default
configuration works well for most network installations.
LEDs that provide information on the link status, network activity,
connection bandwidth, and communication mode (half or full duplex).
12 100-FX ports with MT-RJ
connectors for 100 Mbps
networking over multimode