Troubleshooting - AEG UltraMix KM55 Series Instruction Book

TROUBLESHOOTING

PROBLEM
The motor slows down during
operation.
The motor does not work.
The appliance vibrates/moves
during operation.
The attachment scrapes the
Stainless steel bowl during
operation.
The Working light and Power
indicator light flashes on
and off.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with normal
household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To
recycle your product, please take it to an official collection point or to an AEG service center that can remove and recycle
the battery and electric parts in a safe and professional way. Follow your country's rules for the separate collection of
electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
www.aeg.com
KM4XXX_KM55XX_Assistent_StandMixer_AEG.indd 9
POSSIBLE CAUSE
Amount of dough may exceed maximum capacity.
Dough may be too wet, it sticks onto the side of
the bowl.
The appliance is not connected to the mains.
The rubber feet are wet.
It is normal for heavy loads (e.g heavy dough,
cheese).
The height of the attachment shaft is incorrect.
The Speed selector has been left turned on.
SOLUTION
Remove half and process in two batches.
Add more flour, 1 tablespoon at a time until
the motor speeds up. Process until dough
cleans the side of the bowl.
Make sure to plug in the appliance before
operation.
Make sure the rubber feet at the bottom of
the unit are clean and dry.
Remove half and process in two batches.
Adjust the height of the attachment shaft.
Turn the Speed selector to "Arrest".
GB
DE
AR
ES
FA
FR
GR
NL
PT
9
2017-12-15 08:57:34