Table of Contents
Advertisement
3. Enter network camera parameters.
Use Camera Activation Password
If it is enabled, the video recorder will add the camera by the set channel default password.
4. Click Add.
Edit Network Camera
You can edit the IP address, protocol and other parameters of network cameras.
Steps
1. Go to Configuration → Camera → Camera.
2. Click
of an added network camera.
Channel Port
If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the drop-down list.
Network Video Recorder User Manual
Figure 6-9 Add IP Camera
46
- Quick Links:
- Activate Your Device
Hide quick links:
Advertisement
Table of Contents
