HIKVISION HiLook NVR-216MH-C/16P User Manual page 50

2. Configure the Live View parameters.
Window Division
Select the live view window division.
Auto Switch Interval
The time to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Alarm Pop-up Output
Select the output to show alarm video.
Alarm Pop-up Delay
Set the time to show alarm event image.
Audio
Turn on/off audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
Configure Live View Layout
Steps
1. Go to Configuration → System → Live View → View.
2. Set Output Interface.
3. Select a window, and double click a camera the list you would like to display.
camera is displayed on the window.
4. Optional: Click
5. Click Apply.
Configure Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Steps
1. Go to Configuration → System → Live View → General.
2. Set Video Output Interface as Channel-Zero.
3. Go to Configuration → System → Live View → Channel-Zero.
Network Video Recorder User Manual
or to start or stop live view of all cameras.
38
means no