Resetting Control Panel Defaults - Epson ET-2850U User Manual

The nozzle check pattern is printed.
6. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check other solutions or try uninstalling and reinstalling your printer software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic:
Related concepts
Uninstall Your Product Software
Print Head Cleaning
Power Cleaning
Print Head Alignment
Related topics
Loading Paper

Resetting Control Panel Defaults

If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the
2. Select Settings > Restore Default Settings.
3. Select one of these options:
• Network Settings: Resets all network settings.
• Copy Settings: Resets all copy settings.
• Scan Settings: Resets all scan settings.
• Clear All Data and Settings: Resets all control panel settings and any stored information.
You see a confirmation screen.
4. Press the OK button to reset the selected settings. (Press the
operation.)
Parent topic:
Solving Problems
home button, if necessary.
Solving Problems
stop button if you want to cancel the
199