3.1.4. Wi-Fi outdoor camera (surface-mounted)
During the installation of the camera, you have the option of accessing the following installation
instructions via the help in the app.
Attention!
Place the camera under a canopy or similar to avoid direct sunlight. The camera should
not be pointed directly at a light source or at the sun.
•
Fix the wall plate of the bracket with the enclosed screws.
•
Insert the ball joint and put on the cover.
•
Afterwards, the fixing ring is slightly screwed on.
•
Now align the camera to the roughly desired coverage
area and tighten the fixing ring.
•
Place the antenna on the connector and screw it tight.
Mark the desired place of use using the drilling template or the
wall plate of the bracket and use a pencil, for example, to
determine the position of the 3 drill holes required. To do this,
please unscrew the bracket.
•
Drill the holes and insert the enclosed dowels.
•
Guide the cable through one of the recesses in the wall
plate
•
Fix the wall plate of the bracket with the enclosed screws.
15
English