Wi-Fi Pan Tilt Outdoor Camera (Surface-Mounted) - Abus PPIC42520B Instruction Manual

3.1.2. Wi-Fi Pan Tilt Outdoor Camera (Surface-Mounted)

During the installation of the camera, you have the option of accessing the following installation
instructions via the help in the app.
Attention!
Place the camera under a canopy or similar to avoid direct sunlight. The camera should
not be pointed directly at a light source or at the sun.
• Connect the power cable and LAN cable (optional for Wi-Fi
use) to the connectors on the camera.
• Guide the cables into the wall. The connections can also be
stowed in the bracket as an option.
• Place the camera and bracket completely on the wall plate
and fix the elements to the underside of the bracket with the
Allen key.
• With this installation, the cables run completely inside the
bracket and are now no longer visible.
• Separate the wall plate of the bracket from the camera with
the enclosed Allen key.
• Mark the position of the required 4 drill holes at the desired
location using the drilling template or the wall plate and e.g.
a pencil.
• Drill the holes and insert the enclosed dowels.
• Fasten the bracket with the enclosed screws.
• Feed the camera's power cable through the bracket and
down as shown in the illustration.
13
English