TABLE 2 CAF-6 CCAS-8 Code 11 = 120/1 21 = 208/1 31 = 240/1 41 = 277/1 Code Wattage (See Table) Code Length 2 = 2 ft. 3 = 3 ft. 4 = 4 ft. 5 = 5 ft. 6 = 6 ft. 7 = 7 ft. 8 = 8 ft. 9 = 9 ft. 10 = 10 ft.
Page 3
Draft Barrier Heater Installation (Wall) 1. Once the correct mounting height is established, scribe or snap a level line on the wall to maintain each heater back plate in horizontal alignment, when mounting. 2. Remove heater front cover by lifting top rear edge to unsnap cover from back plate (store cover in safe location to avoid damage to the finish).
2. Run a ground jumper from the ground screw in one terminal box to the ground screw in the adjacent terminal box. (See Figure 4.) Please refer to the Chromalox limited warranty applicable to this product at http://www.chromalox.com/customer-service/policies/termsofsale.aspx. WIRING Table 4: Terminal Box Volumes (Cubic Inches)