Vista S3
Specifications
•
Brightness
3000 ANSI lumens
•
•
90% brightness uniformity across
the screen
Contrast Ratio (1.5-2.2:1 zoom lens)
300:1 ANSI, 800:1 full field
•
Resolution/Digital Processing
•
3-chip 0.9" DMD™‚ (Digital
Micromirror Device) system
True SXGA 1280 x 1024 chip resolution
•
•
13-bit user selectable gamma table
More than 1 billion displayable colors
•
Dynamic Scaling
•
Resizing capabilities to scale down
from 1600 x 1200 and up from
640 x 480 to SXGA resolution
•
Independent horizontal and vertical
scaling adjustment for graphics
and video inputs
F E AT U R E S
•
The S3 offers the ability to input pixel
formats with independent horizontal
and vertical scaling control.
Horizontal Frequency Range
15 to 120kHz
•
Vertical Frequency Range
•
24 to 120Hz
Field Interchangeable Optional Lenses
•
Fixed short throw lens: 1.2:1
Zoom lenses: 1.5-2.2:1, 2.2-4:1,
•
and 4-7:1
Up to 130% of vertical lens offset for
•
off-axis projection
•
Up to 80% of horizontal lens offset
Compatibility with VistaGraphX lenses:
•
0.8:1, 2.5-4:1, 4-7:1 (adapter required)
Screen size: 1.8m - 12.2m
•
(6ft - 40ft) diagonal
Lens Mount
•
Manual horizontal and vertical lens
offset, focus and zoom adjustments
•
"Bayonet-style" lens insertion system
Lens mount tilt adjustment
•
Built-in light shutter
•
Inputs
•
Built-in RGB/YUV/YPbPr inputs allowing
separate H and V syncs, composite
sync and sync-on green/luma
(5 BNC connectors)
Multi-standard Video Decoder Module
•
(NTSC 3.58, NTSC 4.43, PAL, PAL 60,
PAL M, PAL N, SECAM) with one
composite video input (BNC and RCA
connectors) and one S-video input (two
BNC and 4-pin mini-DIN connectors)
•
Built-in Audio Control Module with
4 stereo audio inputs and 1 stereo
output (RCA connectors)
Slot for an optional input module
•
•
Full compatibility with third party
switchers
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL5132
Aug 02-NA
HDTV/DTV Compatibility
Full HDTV/DTV compatibility on
•
analog RGB/YPbPr inputs
Accepts 480i, 480p, 576i, 576p, 720p,
•
1035i, and 1080i formats at all
applicable frame/field rates
Accepts 1080p at 24, 25 and 30Hz
•
frame rates
Optional HDTV Serial Digital
•
Input Module
Various Keypads
•
Standard hand-held IR backlit remote
keypad, front and rear infrared sensors
•
Built-in backlit keypad
Optional RS422 two-way remote
•
controller with LCD display using 6-pin
XLR connector with range of
600ft (183m)
•
Optional wired backlit remote keypad
with 3-pin XLR connector
•
The S3 offers an inexpensive brightness
upgrade path.
Control/Networking
Third party control system and
•
switcher compatibility
•
Dual RS232 ports for computer
control, with loop-through for
connection of multiple projectors
Dual 6-pin XLR RS422 ports for
•
connection of optional LCD two-way
controllers and loop-through to multiple
projectors up to 600ft (183m)
Diagnostics
•
Built-in LCD diagnostic display indicates
operational status and error messages
Power and status LED
•
•
Full diagnostics through RS232
9-pin D connector
Graphical User Interface
Auto set-up feature
•
•
"Direct Access" intuitive user interface
for complete projector control in
5 world languages
On-screen user movable menus to fit
•
different image aspect ratios
(4:3, 5:4, 16:9, etc.)
On-screen help menus
•
•
100 channel memories
Auto power feature
•
Lamp Specification/Color
Temperature
•
700W Xenon CERMAX
®
illumination system
•
Pre-aligned lamp module
Constant color temperature over the
•
lamp life
Color temperature adjustment range:
•
32000K to 93000K
•
User replaceable lamp within 5 minutes
Typical lifetime: 1000 hours
•
Variable Lamp Power Supply/Light
Output Control (LiteLOC™)
•
"Auto Brightness" mode to maintain
constant brightness over time
•
"Lamp Conserve" mode to extend the
lamp life
"Max Brightness" mode for maximum
•
light output
Power Requirements
Line voltage: 100 VAC to 240 VAC
•
+/- 10% @ 50/60Hz
•
Power consumption: 1150W maximum
Thermal dissipation: 3950BTU/hr
•
•
Operating current: 11.5A maximum
(at 100 VAC)
Weight and Size
88 lbs (39.9 kg)
•
•
22.28" W x 30.1" L x 11.88" H
(56.6cm W x 76.5cm L x 30.2cm H)
•
"Bayonet-style" lens insertion system
and lens mount tilt adjustment.
Standard Accessories
IR remote keypad with batteries
•
•
User manual with warranty card
2.44m (8ft) line cord
•
Optional Accessories
Serial Digital Input (SMPTE 259M/CCIR
•
601) with loop-through feature
Digital HDTV Input module (with loop-
•
through feature) compatible with
all known HDTV formats
•
DVI/DFP Input module
10-bit ADP (Advanced Digital
•
Processing) module
•
Wired remote keypad
Motorized lens mount upgrade
•
•
RS422 two-way remote LCD controller
Replacement lamp module
•
Remote infrared sensor
•
•
Service manual
Librarian communication software
•
•
Transit case
Regulatory Approvals
CSA, UL and European safety approvals
•
North American and European
•
EMI/EMC approvals
Warranty
One year parts and labor
•
Accessories: one year
•
Due to constant research,
specifications are subject to
change without notice
.
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
sales-us@christiedigital.com
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
sales-canada@christiedigital.com
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
sales-europe@christiedigital.com
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
sales-singapore@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
sales-france@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
sales-china@christiedigital.com
WWW.CHRISTIEDIGITAL.COM