Table of Contents
Advertisement
3
To save a length setting as number 1,2 or 3 of the memory settings,
press the on/off button for 2 seconds.
The display shows the word 'SEt' when the length setting is correctly
,
saved. Memory setting number 1,2 or 3 lights up continuously.
Selecting a memory setting
1
To enter the memory, press the on/off button for 2 seconds.
Number 1 starts to flash.
,
Note: To select number 2 or 3 in the memory, scroll upwards or downwards
until number 2 or 3 flashes on the display.
2
Press the on/off button to confirm the selected memory setting.
The number of the selected setting lights up continuously.
,
Length setting lock
This feature prevents accidental changing of the length setting during
trimming. Every time you switch on the appliance, the length setting lock
is activated. You can only change the length setting if you switch off
the appliance.
1
Scroll upwards and downwards to select the desired length setting.
2
Switch on the appliance.
The lock symbol starts to flash. You cannot change the length setting
,
anymore.
Note: If you want to select a different length setting, switch off the appliance.
Scroll upwards or downwards to select the desired length setting and switch on
the appliance again.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
Never immerse the appliance or the charging stand in water or rinse it
under the tap.
1
Make sure the appliance is switched off and disconnected from
the mains.
2
Wipe the housing of the appliance with a dry cloth.
ENGLISH
9
Advertisement
Table of Contents
