Table of Contents
Advertisement
ENGLISH
10
3
Remove the comb and clean it with the cleaning brush.
4
Press the release button (1). The cutting unit comes off the
appliance (2).
5
Clean the cutting unit with the cleaning brush.
6
Clean the inside of the appliance with the cleaning brush.
7
To reattach the cutting unit, insert the lug of the cutting unit into
the guiding slot.
8
Insert the lug of the cutting unit into the guiding slot (1) and push
the cutting unit back onto the appliance (2).
9
Wipe the charging stand with a dry cloth.
Note: If the message 'CL' is shown on the display, too much hair has collected
between the comb and the cutting unit. Remove the comb and cutting unit and
clean them with the cleaning brush supplied. Also clean the top edge of the
handle with the cleaning brush supplied.
Advertisement
Table of Contents
