Subscribe to Our Youtube Channel
Related Manuals for Euromaid INLU92BG
Summary of Contents for Euromaid INLU92BG
- Page 1 User Manual Off Board Undermount Rangehood INLU92BG - HOOD INLEM3 / INLRCM3 - MOTOR...
-
Page 2: Table Of Contents
Content 1…………………………………..………………………………Safety instructions 2…………………………………..………………………………Installation 3…………………………………..………………………………Start using your Rangehood 4…………………………………..………………………………Troubleshooting 5…………………………………..………………………………Maintenance and cleaning 6…………………………………..………………………………Environment protection SAFETY INSTRUCTIONS This manual explains the proper installation and use of your Rangehood, please read it carefully before using even if you are familiar with the product. The manual should be keptin a safe place for future reference. - Page 3 Things to never do: ●All installation work must be carried out ● Do not try to use the Rangehood by a competent person or qualified without the grease filters or if the filters electrician. are excessively greasy! ●Please dispose of the packing material ●Do not install above a cooker with a carefully.
- Page 4 ●This appliance is not intended for ●There is a fire risk if cleaning is not use by persons (including children) carried out in accordance with the with reduced physical, sensory or instructions mental capabilities, or lack of ●Regulations concerning the discharge experience and knowledge, unless of air have to be fulfilled.
- Page 5 IMPORTANT INFORMATION Points to consider for installation 1. Before installation, please ensure the area is clean to avoid suction of the remaining bits of debris and dust. 2. Please ensure that the fan motor is firmly secured to either a flat surface such as an MDF panel affixed across the ceiling rafters, or fixed to the ceiling rafters themselves.
- Page 6 INSTALLATION (VENT OUTSIDE) Roof Cavity fan motor Schematic diagram 1. Connect the Rangehood main body with the external cabinet by control wire, to achieve power on and off, and also speed switching. 2. The control wire is separated into 3 parts, the first two parts are fixed onto the main body and external cabinet, while the middle part is extension wire.
-
Page 7: Installation
MOUNTING OF THE V-FLAP If the Rangehood does not have an assembled V-flap 1, you should mount the half- parts to its body. The images only show an example of how to mount the V-flap, the outlet may be various according to different models and configuration. To mount the V-flap 1 you should: •... - Page 8 2. The Rangehood should be placed at a distance of 65~75cm above the cooking surface for best effect. 3. Drill a hole in the cabinet, make sure the hole edge to the cupboard edge at least 35mm distance. 4. Unscrew the 4 screws on the outer glass frame panel by screwdriver, pull out the light wire, take down the outer glass frame panel, see Pic 2.
- Page 9 6. Put the hood into the cabinet, tighten up the screws by screwdriver, and make sure the hood was fixed. See Pic 4. Pic 4 7. Connect the light wire and assemble the outer glass frame panel by screw. 8.Install the outlet and expansion pipe: install the outlet on the Rangehood, and equip the expansion pipe on the outlet then lead it to outdoor.
- Page 10 12. Screw 4 pcs 4*30mm screws to fix the external cabinet onto the ceiling. See pic 9& 10. Pic 9 Pic 10 13. Install the expansion pipe and fix it with cable tie. See pic 11. 14. Equip the expansion pipe to the outlet, and fix with cable tie. Lead one end of the expansion pipe which install on the external cabinet outlet to the outside.
- Page 11 13. Installation is finished. HINTS FOR EXHAUST DUCT INSTALLATION The following rules must be strictly followed to obtain optimal air extraction: • Keep expansion pipe short and straight. • Do not reduce the size or restrict expansion pipe. • When using expansion pipe always install the pipe pulled taut to minimize pressure loss.
- Page 12 INSTALLATION (VENT OUTSIDE) External fan motor Schematic diagram 8. Connect the Rangehood main body with the external cabinet by control wire, to achieve power on and off, and also speed switching. 9. The control wire is separated into 3 parts, the first two parts are fixed onto the main body and external cabinet, while the middle part is extension wire.
- Page 13 11. Make a φ220mm hole on the wall, and let the expansion pipe and motor connecting wire to across the wall together. Screw 4 pcs wall plugs into the wall, and then fix the cabinet on the wall with 4 pcs 4*30mm screws. See pic 7. Pic 7 Pic 8 12.
- Page 14 Pic 9 HINTS FOR EXHAUST DUCT INSTALLATION The following rules must be strictly followed to obtain optimal air extraction: • Keep expansion pipe short and straight. • Do not reduce the size or restrict expansion pipe. • When using expansion pipe always install the pipe pulled taut to minimize pressure loss.
-
Page 15: Start Using Your Rangehood
WARNING: For safety reason, please use only the same size of fixing or mounting screw which are recommended in this instruction manual. Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards. -
Page 16: Troubleshooting
TROUBLESHOOTING Fault Possible Cause Solution Fan switch turned off Select a fan switch position. Light on, but motor Fan switch failed Contact service centre. does not work Motor failed Contact service centre. House fuses blown Reset/Replace fuses. Light does not work, motor does Power cord loose or Refit cord to power outlet. - Page 17 CONTROL PANEL SURFACE The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning. Important Using neutral detergents and avoid using harsh cleaning chemicals, strong household detergents or products containing abrasives, as this will affect the appliance appearance and potentially remove any printing of artwork on the control panel and will void manufactures warrantee.
- Page 18 BULB REPLACEMENT Important: The bulb must be replaced by the manufacturer, its service agent or similarly qualified persons. Always switch off the electricity supply before carrying out any operations on the appliance. When handling bulb, make sure it is completely cooldown before any direct contact to hands.
-
Page 19: Environment Protection
ENVIRONMENTAL PROTECTION: This product is marked with the symbol on the selective sorting of waste electronic equipment. This means that this product must not be disposed of with household waste but must be supported by a system of selective collection in accordance with Directive 2012/19/EU. - Page 20 Distributed by: Glen Dimplex Australia Pty Ltd 1340 Ferntree Gully Road, Scoresby VIC 3179 Tel: 1800 444 357 Email: customercare@hapl.com.au Website: www.euromaid.com.au...
Need help?
Do you have a question about the INLU92BG and is the answer not in the manual?
Questions and answers