Mitre Saw; Technical Data; Definitions: Safety Guidelines - DeWalt DCS727T2 Manual

English

MITRE SAW

DCS727
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Blade diameter
Blade bore
Blade body thickness
Max. kerf thickness
Max. blade speed
Max. cross‑cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross‑cut 45°
Mitre (max. positions)
Bevel (max. positions)
0 ° mitre
Baseboard max. height 150 mm
Resulting width at max. height 90 mm
Resulting height at max. width 305 mm
45 ° mitre left
Resulting width at max. height 90 mm
Resulting height at max. width 210 mm
45 ° mitre right
Resulting width at max. height 90 mm
Resulting height at max. width 210 mm
45 ° bevel left
Resulting width at max. height 60 mm
Resulting height at max. width 305 mm
45 ° bevel right
Resulting width at max. height 28 mm
Resulting height at max. width 305 mm
Automatic blade brake time
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841‑3‑9:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
WALT one of the most reliable
E
DCS727
V
DC
Li‑Ion
mm 250
mm
mm 1.75
mm 3.0
min 4300
-1
mm 305
mm 215
mm
mm
left 50°
right 60°
left 49°
right 49°
mm
mm 290
mm
mm 200
mm
mm 200
mm
mm 290
mm
mm 290
mm
s < 4
kg 20.5
dB(A) 100.3
dB(A) 111.7
dB(A)
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
54
EC‑Declaration of Conformity
1
Machinery Directive and Radio Equipment Directive
30
Mitre Saw
DCS727
WALT declares that these products described under Technical Data are
D
E
in compliance with:
2006/42/EC, EN62841‑1:2015/AC:2015; EN62841‑3‑9:2015/AC:2016‑09.
90
These products also comply with Directive 2014/53/EU, 2014/30/EU and
50
2011/65/EU. For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
28
Markus Rompel
77
Vice‑President Engineering, PTE‑Europa
WALT, Richard‑Klinger‑Straße 11,
D
E
D‑65510, Idstein, Germany
14.06.2019
77
WARNING: To reduce the risk of injury, read the
instruction manual.
77

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
50

DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not
20
avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.

Denotes risk of electric shock.

3
Denotes risk of fire.
WALT at the following
E
WALT.
E