Page 2
Dansk (oversat fra original brugsvejledning) Deutsch (übersetzt von den originalanweisungen) English (original instructions) Español (traducido de las instrucciones originales) Français (traduction de la notice d’instructions originale) Italiano (tradotto dalle istruzioni originali) Nederlands (vertaald vanuit de originele instructies) Norsk (oversatt fra de originale instruksjonene) Português (traduzido das instruções originais) Suomi (käännetty alkuperäisestä...
EN GLI SH CORDLESS JIGSAW DCS331, DCS332 Congratulations! WARNING: The declared vibration emission level represents the main You have chosen a D WALT tool. Years of applications of the tool. However if the experience, thorough product development and tool is used for different applications,...
Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of DCS331, DCS332 electric shock. WALT declares that these products described Avoid body contact with earthed or...
Page 10
EN GLI SH use. Use of a cord suitable for outdoor use tool that cannot be controlled with the switch reduces the risk of electric shock. is dangerous and must be repaired. If operating a power tool in a damp Disconnect the plug from the power location is unavoidable, use a residual source and/or the battery pack from...
EN G LI SH 6) SERVICE Markings on Tool Have your power tool serviced by a The following pictograms are shown on the tool: qualified repair person using only identical replacement parts. This will ensure that the Read instruction manual before use. safety of the power tool is maintained.
EN GLI SH • The charger is designed to operate on • DO NOT attempt to charge the battery pack standard 230 V household electrical power. with any chargers other than the ones in Do not attempt to use it on any other this manual.
• DO NOT splash or immerse in water or other The DCS332 operates on an 14.4 volt battery pack. liquids. The DCS331 operates on an 18 volt battery pack. • Do not store or use the tool and battery The DCB140, DCB141, DCB142, DCB180, pack in locations where the temperature DCB181 or DCB182 battery packs may be used.
EN GLI SH 2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry place See Technical Data for charging time. out of the charger for optimal results. NOTE: Battery packs should not be stored Only for indoor use.
(see Technical Data). The minimum conductor size is 1 mm ; the maximum length is 30 m. Your DCS332 and DCS331 jig saws are designed for professional cutting of wood, steel, aluminium, When using a cable reel, always unwind the cable plastic and ceramic material at various work sites completely.
NOTE: The DT2074 flush cutting blade is for use action provides a faster cut, but with a less smooth with D WALT DCS331, DCS332, DW331 and cut across the material. In orbital action, the blade DC330 jig saws only. moves forward during the cutting stroke in addition to the up and down motion.
EN G LI SH The anti-splinter insert should be installed into the WARNING: To reduce the risk of anti-scratch shoe cover (j). If the no-mar cover is not serious personal injury, ALWAYS hold used, install anti-splinter insert into shoe (g). securely in anticipation of a sudden reaction.