Pro:centric; Server Type; Installation Code; Mode - LG UR57 Series Installation Manual

Pro:Centric

(Depending on model)

Server Type

(Depending on model)
• You can set to 'Standard Pro:Centric Server' , 'LG Pro:Centric Cloud' .
• If you select 'LG Pro:Centric Cloud' , you can configure Cloud.

Installation Code

(Depending on model)
• If you input the 6-digit installation code, the server is automatically searched.
• The results of the server search are displayed in a pop-up.
• If the server is not found or is an invalid code, a "Server Not Found" message is displayed.
• If the server is found correctly, the message "Server Found [property name]" is displayed.
• If you click the 'Confirm' button in the popup, the installation code is saved.
• If you click the 'Cancel' button in the popup, the installation code is restored to previous value.

Mode

• Sets whether or not enable Pro:Centric and the service method.
• You can set to Off, Configuration Only, GEM or HTML. The default value is Off. ('Mode' items is differ depending on model)

Update Event

• When set to 'Enable' , Hour and Minute items are enabled and then the Update Event function is enabled.
• When set to 'Disable' , 'Hour' and 'Minute' items are disabled and then the Update Event function is disabled.

Room Number Setting

• You can set Label and Room Number using the Room Number Setting.

Media Type

(Depending on model)
• Sets the media type to RF or IP.
• The default value is RF.
32