Table of Contents
Advertisement
24 Fail Over Mode (Command: m i)
►Selects the Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
Data 01: Auto
Data 02: Manual
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
25 Fail Over Input Select (Command: m j)
►Selects an input source for fail over. (This feature is only available
when Fail Over is set to Custom.)
Transmission
[m][ j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]... [ ][DataN]
[Cr]
Data1-N (Input priority 1-N)
Data 20: AV1
Data 21: AV2
Data 22: AV3
Data 90: HDMI1
Data 91: HDMI2
Data 92: HDMI3
Data 93: HDMI4
Ack
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]... [DataN][x]
* Some input signals may not be available for all models.
* The data number (N) may vary depending on the model. (The data
number depends on the number of supported input signals.)
26 Internal storage media contents play (Command: s n, a8)
►Plays media stored in the internal memory.
►This command may work differently depending on model and
signal.
Transmission
[s][n][ ][Set ID][ ][a][8][ ][Data][Cr]
Data 01 : media contents play
Acknowledgement
[n][ ][Set ID][ ][OK/NG][a][8][ ][Data][x]
* Real data mapping
00 :
Step 0
A :
Step 10 (Set ID 10)
F :
Step 15 (Set ID 15)
10 :
Step 16 (Set ID 16)
64 :
Step 100
6E :
Step 110
73 :
Step 115
74 :
Step 116
CF :
Step 199
FE :
Step 254
FF :
Step 255
77
Advertisement
Table of Contents
