Pro:Centric
(Only LT34*H/LS34*H series)
* Image shown may differ from your TV.
1 Use the
button to select the Network Setup.
Mode
• Sets whether or not enable Pro:Centric and the service method.
• You can set to Off, Configuration only, GEM. The default value is Off; when it is set to Off, all the sub items are disabled. (Except for WORF,
Room Number Setting)
Room Number Setting
• You can set or change Label and Room Number using the Room Number Setting.
Media Type
* LT34*H/LS34*H series do not support IP mode
• You can set to IP or RF.
- If it is set to IP, RF is disabled.
- If it is set to RF, P:C IP Setting is disabled.
Receive data
• Set to On or Off.
- If the setting is On, receive data via RF or IP.
- If the setting is Off, data carousel is not supported. It can be downloaded via only USB.
RF Type
• Sets the RF modulation type to DVB-T or DVB-C. The default value is DVB-T.
19