Table of Contents
Advertisement
Welcome Video Mode
(Depending on model)
• You can set to Off, Once or Repeat.
Operation
• The video displays after your TV is turned on and the boot logo appears.
• If Welcome Video is enabled and a video is downloaded on the TV, the video plays.
• The time it takes a video to be displayed may differ depending on the decoding time of the video.
• Controls for playing the video are not available. (Pause, stop, fast forward, etc.)
• Videos in any file format that the TV supports can be downloaded and displayed.
Crestron
(Depending on model)
• This function enables synchronization with applications provided by Crestron.
• Server: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron).
• Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794.
• IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
• The connection status of the server type shall be indicated by pictures and phrases. (Disconnected, Connecting, Connected)
• Type: You can select the server type you want to connect to (Off, Control System, Virtual Control, Fusion)
• CONNECT: If you press the button once, a set tries to connect to the server and the button phrase is changed into DISCONNECT. In this case, the
upper items are immutable. To disconnect and change upper items, pressing the button again is needed.
• Information for connecting with the server
- Type: Control System
- Server: Enter the IP information of the server
- Port: Enter the Port information for the server
- IP ID: A unique ID that distinguishes crestron equipment from server
- Type: Virtual Control
- Room ID: A unique ID that distinguishes room from server. If the IP ID is the same, but the Room ID is different, the server recognizes it as a
different crestron equipment.
- Server, Port, IP ID are the same as Control System's.
- Type: Fusion
- Method: Connection direction can be selected. (Device to Fusion, Fusion to Device)
- Device to Fusion: How to connect from set to server
- URL: Server URL
- Port: Server Port
- Fusion to Device : How to connect from server to set
• Auto Discovery: The ability to locate other Crestron equipment in the network
• SSL: Communication security with server can be established. The following items are meaningful only at SSL on
- User, Password: When the Authentication function is turned on on the server, User and Password must be entered to connect with the server.
- Verify Certificate: A feature that checks whether a certificate installed on a server is valid. If it is not valid, it does not connect to the server
- Certificate Download: The certificate must be stored in the set to perform the Verify Certificate function. Only certificates with extensions .pem,
.crt in the USB root directory are recognized and can be added or deleted through the menu. All certificates stored at the time of Factory Reset
are deleted.
43
Advertisement
Table of Contents
