LG UR76 Series Installation Manual
Hide thumbs
Also See for UR76 Series:
- Installation manual (81 pages) ,
- Installation manual (68 pages) ,
- Installation manual (68 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG UR76 Series
Summary of Contents for LG UR76 Series
- Page 1 INSTALLATION MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. UR64* UR76* *MFL71684531* www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
- TV Configuration Options - Set ID Setup - Configure Pro:Centric Server - Power Saving - Standard Pro:Centric Server Settings - HCEC Setup - LG Pro:Centric Cloud Settings - Clock Setup Installation Menu Settings - Crestron - Welcome Video Mode Installation Menu... - Page 3 - Web Login - Content Manager - Group Manager 2.0 IR Codes External control device Setup RS-232C Setup Type of Connector : D-Sub 9-Pin Male RS-232C Configurations Communication Parameters IR OUT Using Guide - Suitable / Not Recommend remote-controller data format - IR Receiver specifications Command Reference List...
-
Page 4: Location And Function Of Controls
Location and Function of LED Clock Connection Controls (Depending on model) This TV can be connected to a LED Clock via the CLOCK port. Parts and Button CLOCK LED Clock (*Not Provided) Basic functions Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold All running apps will close. -
Page 5: First Use Wizard
First Use Wizard * Images shown may differ from your TV. (Depending on model) • There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by Start button. (Normal Configuration is the default focus item.) -
Page 6: Basic Settings
Basic Settings (Depending on model) This menu is for Basic Settings related to language, network, portal, voice service coverage and programme tuning without SI (Pro:Centric) setting. There are four steps for it. Language & Location (Depending on model) • Select the Language and Country. Some countries need to select the Time Zone. -
Page 7: Network Settings
Network Settings (Depending on model) • Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 30) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK) -
Page 8: Portal Settings
Portal Settings (Depending on model) • Set the Portal Mode and Portal Auto Start. Portal Mode (Depending on model) • You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal). Portal Auto Start •... -
Page 9: Voice Service Coverage
Voice Service Coverage (Depending on model) • Set the voice service coverage. You can set LG Service Country and Service Area Postcode(Depending on model) for voice service. -
Page 10: Data Cloning
Data Cloning (Depending on model) Access Data cloning menu of TV Manager application for applying cloning file. Solution Settings (Depending on model) The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”... -
Page 11: Tv Configuration Options
TV Configuration Options (Depending on model) From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV. Also, you can configure the network environment. - Page 12 • If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 55) • If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Settings” on page 30) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW.
-
Page 14: Configure Pro:centric Server
Configure Pro:Centric Server (Depending on model) You can select two options. • Standard Pro:Centric Server Settings : Default Automatic / Manual Pro:Centric Server Configuration • LG Pro:Centric Cloud Settings : Installation Code based simple installation for Cloud solution... -
Page 15: Standard Pro:centric Server Settings
Standard Pro:Centric Server Settings (Depending on model) Automatically for Setup This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data programme, select the Next. - Page 16 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
- Page 17 Manually for Setup Please select the Manual Pro:Centric. Configure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
- Page 19 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 20: Lg Pro:centric Cloud Settings
LG Pro:Centric Cloud Settings (Depending on model) From the Pro:Centric Cloud setting screen, You can input the installation code that issued from Pro:Centric Cloud server. Server Searching • Server search succeed : The message “Server Found [property name]” is displayed. And the search button changes to the next button. -
Page 21: Installation Menu Settings
Download Pro:Centric App • After clicking the next button, Downloading the Pro:Centric application files takes few minutes. Download Complete • After the installation is completed, the following screen will be displayed. Installation Menu Settings (Depending on model) Access Installation menu for commercial feature settings. -
Page 22: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 23: Lg Hotel Mode Setup
LG Hotel Mode Setup When ‘LG Hotel Mode Setup’ is set to On, all functions of Hotel Mode apply. Power On Status • Decide to select working status of TV Set when turn on main power. • You can select PWR, STD, LST. -
Page 24: Volume
- When selected to 'On' , if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used. - Access to a volume in ‘Timer Power On’ must be fixed to start volume when ‘LG Hotel Mode Setup’ (On) and ‘Start Volume’ (Off, 0 ~ 100) were set simultaneously. -
Page 25: Limited Mode
Limited Mode • Configure TV function’ s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu • Permit to tune and manage programmes. Programme Change (Depending on model) • Decide to change programme or not. Menu Display •... -
Page 26: Power On Default
Power On Default • Set the programme to display, etc. when turn on power. • When set to Off, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio menu. • When set to On, it can set by entering the subordinate menu. Input •... -
Page 27: Signage
- Refer to Installation Menu Signage System Information. (See p. 29) • LG Promota - This feature allows connection of promota app on mobile device. - For more information on how to use it, please visit the promota website (https://www.promota.net/). -
Page 28: Fail Over
Meeting Room • Input Shortcut - Refer to Installation Menu Portal Settings Input Shortcut. (See p. 47) • Network Ready - Monitor is turned off, but you can control power internally through the network. • WOL - Refer to Installation Menu Network Wake On LAN. -
Page 29: Lg Connectedcare
Enter Account Number : Enters the 6-digit account number to install LG ConnectedCare solution. - Account Number : The number assigned when the LG ConnectedCare solution is registered. When the accountnumber is entered, the account name corresponding to the number is obtained. -
Page 30: Network
Network (Depending on model) MAC Address • Displays the MAC address (not customizable). Network Settings One-click network connection • Connects easily to a network. • This menu supports to connect to an available network. To connect to a network through Set Expert •... -
Page 31: Lg Connect
LG Connect (Depending on model) • Sets the 'LG Connect' function to On or Off. - You can connect TV via 'LG ThinQ' app in smart device. - Default setting is 'On' . IP Stream Control (Depending on model) Audio PTS Offset •... -
Page 32: Pro:centric
• You can set to Off, Configuration Only, GEM or HTML. The default value is Off. Server Type (Depending on model) • You can set to ‘Standard Pro:Centric Server’ , ‘LG Pro:Centric Cloud’ . • If you select ‘LG Pro:Centric Cloud’ , you can configure Cloud. Installation Code (Depending on model) •... -
Page 33: Worf
WORF • When set to ‘Enable’ , Hour and Minute items are enabled and then the WORF function is enabled. • When set to ‘Disable’ , ‘Hour’ and ‘Minute’ items are disabled and then the WORF function is disabled. Room Number Setting •... -
Page 34: General
General Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU • Number of RCU value range 1~16. (When ‘Select RCU’ is set to ‘Enable’) •... - Page 35 RS232 DC Power Outlet (Depending on model) • It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu. We offer a output terminal in one Pin of RS232C Jack for the use of communication.
- Page 36 One Channel Map (Depending on model) • If set to ‘Enable’ , the TV will operate as below. - When the TV is auto-scanning, it searches both air and cable channels. - User can assign a channel number him/herself by manual scan. - In 'Programme Edit’...
- Page 37 DVB-C Bandwidth (Depending on model) • If country is 'Philippines' , 'DVB-C Bandwidth' menu will be shown. • Select the bandwidth of cable tuning (6 MHz/8 MHz). The default is 6 MHz. Additional Pixel Refresher (Depending on model) • If set to Power Plug In, TV always does pixel refresh when AC power on. •...
- Page 38 No Signal Image (Depending on model) • You can set to ‘Off’ , ‘Default Image’ or ‘Downloaded’ . • It is a mode to decide whether to use no signal image when there is no signal. • When set to ‘Off’ , do not use no signal image. •...
-
Page 39: Mobile Remote
• You can configure the Sound Out to be set after power on. • You can select Off, TV Speaker, Optical, LG Sound Sync., HDMI ARC • If you set this option to Off, the TV maintains Sound Out after power on. -
Page 40: External Speaker
External Speaker (Depending on model) Volume Control • Selects the volume control method of an external speaker. • You can select ‘Off’ , ‘Int Variable’ , ‘Fixed’ or ‘Ext Variable’ . (Depending on model) • Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 2 Watts. •... -
Page 41: Power Saving
• You will have 2 modes to choose [Default], [HCEC] and [TVLink-CEC]. • If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. • If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document) •... -
Page 42: Clock Setup
• If you use following functions via TVLink-HCEC, HTNG Hotel mode will be set as “Yes” automatically. - Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume. • Even if ‘LG Hotel Mode Setup’ is set as No, above settings are still effective. Clock Setup... -
Page 43: Crestron
Clock Source • You can select ‘Off’ , ‘Pro:Centric’ , ‘TV’ , ‘NTP’ , ‘Admin’ . • NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected. (Depending on model) • Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC, TVLink-Interactive, or HCAP API. •... -
Page 44: Welcome Video Mode
- Type: Fusion » Method: Connection direction can be selected. (Device to Fusion, Fusion to Device) » Device to Fusion: How to connect from set to server URL: Server URL Port: Server Port » Fusion to Device : How to connect from server to set •... -
Page 45: Security
Security Port Control (Depending on model) • Unused ports can be blocked for network security. Lock Mode • USB - If set to ‘Enable’ , USB devices do not work in relative features. (Updates via USB are possible regardless of the 'USB' lock. However, some models cannot be updated via USB.) •... -
Page 46: Portal Settings
Portal Settings (Depending on model) Portal Mode (Depending on model) • You can select 'Default Portal' (Use webOS default portal), 'Customizable Portal' (Use editable Portal), or 'None' (Do not use portal). Auto Start (Depending on model) • You can select 'Off' , 'Website Shortcut' , or 'Portal Mode' . •... -
Page 47: Website Shortcut
Website Shortcut (Depending on model) Shortcut • Sets Enable or Disable. When it is set to Enable, Website Shortcut app is displayed at launcher bar. Shortcut Name • You can set Website Shortcut app name (title). Shortcut URL • Sets URL to connect when excute Website Shortcut app. Shortcut Icon •... -
Page 48: Portal Editor
Details or Extension • Set the detailed information. Related Photo • You can select None, downloaded images or Download (Go to TV Manager). • You can download the directory images at TV Manager app. Portal Editor (Depending on model) • If you press ‘Portal Editor’ menu, each portal editor is launched according to 'Portal Mode' . Customizable Portal * Images shown may differ from your TV. - Page 49 • Edit Template - Vertical » You can set Vertical when selecting focus. Select between Hotel or Hospital. - Template » You can set Template when selecting focus. Select between Bar Type or Tile Type. - Video » You can set this mode to On/Off when selecting Customizable Portal. »...
-
Page 50: Portal Manager
Portal Manager (Depending on model) This feature enables you to group together multiple monitor sets on a single network into the same group and copy portal setting data on a group basis. This feature has two modes, Master and Slave. Master •... - Page 51 Portal Distribution Select your desired group and click Distribute. Set power off on the slave sets by using remote controller after distribution is completed. Check that the data have been copied on the slave sets after a 1 minute. How to Use •...
-
Page 52: Media Share
Media Share (Depending on model) Smart Share (Depending on model) • Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share app. Screen Share (Depending on model) •... -
Page 53: Softap
SoftAP (Depending on model) • SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point. • Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model) Use Default •... -
Page 54: Beacon
Beacon (Depending on model) • This option enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The iBeacon/Eddystone Type Beacon features are supported. iBeacon • Beacon UUID (hex): Set the UUID. - Field1: 4byte hex value (8 digits) - Field2: 2byte hex value (4 digits) - Field3: 2byte hex value (4 digits) -
Page 55: Tv Manager
TV Manager * Images shown may differ from your TV. You can update files from USB to TV through the TV manager. Diagnostics (Depending on model) • Sets Enable or Disable. When it is set to Disable, user can’t control TV via RMS. The changed setting is applied after reboot. - Page 56 Ez Download • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Media files, Micom, Pro:Idiom M Key. (Depending on model) - Images, Icon, Pro:Idiom M Key file and Software Update files should be copied into the folder named LG_DTV on the USB. »...
- Page 57 • Press button to display storage usage information. • Press the “Clear Storage” button to delete the downloaded media files.
-
Page 58: Usb Download Menu
USB Download Menu USB Cloning An Installation can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Installation Menu settings, User A/V settings and the programme Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. - Page 59 Image Download (Depending on model) • The download sequence is Image Download Select Image(s) Download. • The target file is located in LG_DTV folders. • Press the "Clear Storage" button to delete the downloaded images. - Boot Logo Image (Depending on model) »...
- Page 60 Icon Download (Depending on model) • If you updates the images, original images will be removed. • The download sequence is Icon Downalod Select Images Download. • Icon update function supports only JPG, JPEG, PNG format file. • Press the Clear Storage button to delete the downloaded icons. - Hotel Icon on Portal, Website Shortcut, Input Shortcut »...
- Page 61 Video Download (Depending on model) • Media files is located in LG_DTV folder. • The download sequence is Video Download Select media file Download. • Media files can only download one file each. • If you updates the video file, original file will be removed. •...
-
Page 62: Data Cloning
Data Cloning Import Clone File • Once the internal TV data and its programme map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card. The user should not turn TV off nor unplug the USB memory card while processing. The following reference images might be slightly different. - Page 63 Export Clone File • “Export Clone File” creates “TLL” file in USB root folder. “TLL” file can be used to “Import Clone File”. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different.
- Page 64 Software Update Update TV Software • This feature updates TV software through the EPK file in USB. • The target file is located in LG_DTV folder. • The download sequence is Software Update Update TV Software Select file(EPK) Update. Update Micom Software •...
-
Page 65: Content Manager
CONTENT MANAGER (Depending on model) Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Log Out, Change Password menus are provided. •... - Page 66 • Create Playlist When creating a playlist, you cannot include characters that cannot be used in file names on Windows — such as \, /,:, *,?, “, <,>, and | — in the names of the files in the playlist. In addition, if the playlist contains content files whose names include such characters, you cannot move or copy the playlist.
- Page 67 • DISTRIBUTION Click Distribute in the upper right-hand corner of the screen. Go to the Group Manager app to distribute the created schedules. - If the schedule creation time overlaps, the previously created schedule is deleted. - Schedule does not work while Scheduling list app is running. Editor (Editor) The Content Manager app’s editor feature enables you to add your desired templates.
- Page 68 Supported Photo File Formats File type Format Resolution • Minimum: Min: 64 x 64 .jpeg, .jpg, .jpe JPEG • Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) • Minimum: Min: 64 x 64 .png •...
-
Page 69: Group Manager 2.0
Group Manager 2.0 (Depending on model) This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device. - Page 70 Setting Data Cloning Select your desired group and click Start. Check that the data have been copied on the slave sets. Schedule Distribution / Playlist Distribution Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click Distribute.
-
Page 71: Ir Codes
IR Codes • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button (Q. -
Page 72: External Control Device Setup
External control device Setup ► B Type RS-232C IN RS-232C Setup (CONTROL & SERVICE) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. -
Page 73: Rs-232C Configurations
RS-232C Configurations IR OUT Using Guide Suitable / Not Recommend remote- 7-Wire Configurations controller data format (Standard RS-232C cable) Item Formats Suitable data format NEC, RC5, Toshiba Continuous data format Not recommend data format (short burst/gap signal) IR Receiver specifications Carrier frequency 37.9 KHz D-Sub 9... -
Page 74: Command Reference List
IR output signals will be suppressed automatically by IR receiver. (Depending on model) • In this case, LG does not guarantee IR working function. • To make sure of this matter, here are two methods as below. Data - Use the remote-controller with suitable data Command1 Command2 formats. -
Page 75: Transmission / Receiving Protocol
Transmission / Receiving Protocol 1 Power (Command: k a) ► To control Power On/Off of the set. Transmission (Depending on Model) [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Off [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 01 : On [Command1] : First command to control the TV. (j, k, m or x) [Command2] : Second command to control the TV. - Page 76 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data Min : 00 to Max : 64...
- Page 77 10 Sharpness (Command: k k) 14 Colour Temperature (Command: x u) ► To adjust the screen sharpness. ► To adjust Colour Temperature. You can also adjust Colour Temperature in You can also adjust sharpness in the picture settings. the picture settings. Transmission Transmission [x][u][ ][Set ID][ ][Data][Cr]...
- Page 78 16 Auto Configuration (Command: j u) (Only RGB support model) 18 Tune Command (Command: m a) ► To adjust picture position and minimize image shaking automatically. It ► Select channel to following physical number. works only in RGB (PC) mode. Transmission Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr]...
- Page 79 21 Control Backlight (Command: m g) 23 Fail Over Mode (Command: m i) ► To control the backlight. ► Selects the Fail Over mode. Transmission Transmission [m][g][ ][Set ID][ ][Data][Cr] [m][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Data 00 : Off Data 01 : Auto Data 02 : Manual...
- Page 80 * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...