Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG UR77 Series
Summary of Contents for LG UR77 Series
- Page 1 INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. US66** UR76** US76** UR77** www.lg.com *MFL69961714* Copyright © 2020 LG Electronics Inc. All Rights Reserved. (2210-REV00)
-
Page 2: Table Of Contents
- Automatically for Setup Media Share - Configure Pro:Centric Server - SmartShare - Standard Pro:Centric Server Settings - Screen Share - LG Pro:Centric Cloud Settings - Media Renderer Installation Menu Settings - DIAL - TV Name Installation Menu - SoftAP... -
Page 3: Location And Function Of Controls
Location and Function of Controls Parts and Button Basic functions Power On (Press) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold All running apps will close. You can access and adjust the menu by pressing the button when TV is on. You can use the function when you access menu control. -
Page 4: First Use Wizard
First Use Wizard * Image shown may differ from your TV. (Depending on model) • There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by START button. (Normal Configuration is the default focus item.) -
Page 5: Basic Settings
Basic Settings * Image shown may differ from your TV. This menu is for basic settings related to language, network, portal, voice service coverage and channel tuning without SI (Pro:Centric) setting. There are four steps for it. Language & Location (Depending on model) •... -
Page 6: Network Settings
Network Settings (Depending on model) • Set Network connection. You can connect easily to wired/wireless network. (”Network” on page 26) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK) -
Page 7: Portal Settings
Portal Settings (Depending on model) • Set the Portal Mode and Portal Auto Start. Portal Mode (Depending on model) • You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal). Portal Auto Start •... -
Page 8: Voice Service Coverage
Voice Service Coverage (Depending on model) • Set the voice service coverage. You can set LG Service Country and Service Area Postcode for voice service. -
Page 9: Data Cloning
Data Cloning (Depending on model) Access Data cloning menu of TV Manager application for applying cloning file. Solution Settings (Depending on model) The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”... -
Page 10: Automatically For Setup
Automatically for Setup (Depending on model) From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV. Also, you can configure the network environment. - Page 11 • If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 48) • If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (”Network” on page 26) Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW.
-
Page 13: Configure Pro:centric Server
Configure Pro:Centric Server (Depending on model) You can select two options. • Standard Pro:Centric Server Settings : Default Automatic / Manual Pro:Centric Server Configuration • LG Pro:Centric Cloud Settings : Installation Code based simple installation for Cloud solution... -
Page 14: Standard Pro:centric Server Settings
Standard Pro:Centric Server Settings (Depending on model) Automatically for Setup This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, select the NEXT. - Page 15 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
- Page 16 Manually for Setup Please select the Manual Pro:Centric. Configure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
- Page 18 Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 19: Lg Pro:centric Cloud Settings
LG Pro:Centric Cloud Settings (Depending on model) From the Pro:Centric Cloud setting screen, You can input the installation code that issued from Pro:Centric Cloud server. Server Searching • Server search succeed : The message “Server Found [property name]” is displayed. And the search button changes to the next button. -
Page 20: Installation Menu Settings
• After clicking the next button, Downloading the Pro:Centric application files takes few minutes. Download Complete • After the installation is completed, the following screen will be displayed. Installation Menu Settings (Depending on model) Access Installation menu for commercial feature settings. -
Page 21: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 22: Public Display Settings
Public Display Settings - When Public Display Settings is set to On, all functions of Public Display Settings apply. Power On Status - Decide to select working status of TV Set when turn on main power. - You can select PWR, STD, LST. - PWR always make TV set On status when turn on main power . -
Page 23: Volume
- Manage key usability of Local(Front) Key and Remote Control. IR Operation • Decide whether work the LG remote control or not. - When set to ‘Normal’ , all remote keys are available. - ‘Use PWR Only’ makes block all remote keys except power key. -
Page 24: Limited Mode
Limited Mode • Configure TV function’s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu • Permit to tune and manage Channels. Channel Change • Decide to change channel or not. Menu Display • Function to decide whether work with menu of control key or not. - Although select Off, the action that press a Menu button for 5 seconds to enter ‘Installation Menu’... -
Page 25: Dtv Channel Update
DTV Channel Update • It is a mode to set whether to update DTV Channel automatically or not. • When set to ‘Auto’ , update Channel map according to DTV Channel’s stream information. • When set to ‘Manual’ , keep Channel map even though DTV Channel’s information is changed. Power On Default •... -
Page 26: Network
Network (Depending on model) MAC Address • Displays the MAC address (not customizable). Network Setting One-click network connection • Connects easily to a network. • This menu supports to connect to an available network. To connect to a network through Set Expert •... -
Page 27: Lg Connect
LG Connect (Depending on model) • Sets the ‘LG Connect’ function to On or Off. - You can connect TV via 'LG TV Plus' app in smart device. - Default setting is 'On' . IP Stream Control (Depending on model) Audio PTS Offset •... -
Page 28: Pro:centric
Pro:Centric (Depending on model) Server Type (Depending on model) • You can set to ‘Standard Pro:Centric Server’ , ‘LG Pro:Centric Cloud’ . • If you select ‘LG Pro:Centric Cloud’ , you can configure Cloud. Installation Code (Depending on model) • If you input the 6-digit installation code, the server is automatically searched. -
Page 29: Media Type
Media Type (Depending on model) • Sets the media type to RF or IP. • The default value is RF. (Depending on model) • Data Channel - Sets the Channel at which the Pro:Centric data is received. • P:C IP Setting - Server Address is set to IP Address. -
Page 30: General
General Configuration Setup Select RCU • It is a mode to set whether to use Select RCU or not. When set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU • Number of RCU value range 1~16. (When ‘Select RCU’ is set to ‘Enable’) •... - Page 31 RS232 DC Power Outlet (Depending on model) • It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu. We offer a output terminal in one Pin of RS232C Jack for the use of communication. •...
- Page 32 » Type of Connector: D-Sub 9-Pin Male Male connector on box, viewed towards connector. Signal Signal requirements RX RS232 Standard RS232 specification TX RS232 Standard RS232 specification IR from TV Power ground 6, 8 Not connected +5 V DC 10 %, max 100 mV ripple 1.5 A +12 V DC 10 %, max 100 mV ripple One Channel Map...
- Page 33 On Timer Operation • It is a mode to select ‘Timer Power On’ working one time or repeatedly. • 'Once': ‘Timer Power On’ in the user menu operates only one time. • ‘Repeat’ : ‘Timer Power On’ operates repeatedly. USB Auto Playback (Depending on model) •...
- Page 34 15Min Auto Off (Depending on model) • When set to ‘Enable’ , TV will turn off if there is no signal in 15Min. Auto Sensing • If set to ‘On’ , the input is automatically switched when the input signal that you set to “ON’ is received. •...
- Page 35 • You can configure the Sound Out to be set after power on. • You can select Off, TV Speaker, Optical, LG Sound Sync., HDMI ARC • If you set this option to Off, the TV maintains Sound Out after power on.
-
Page 36: External Speaker
External Speaker (Depending on model) Volume Control • Selects the volume control method of an external speaker. • You can select ‘Off’ , ‘Int Variable’ , ‘Fixed’ or ‘Ext Variable’ . (Depending on model) • Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 2 Watts. •... -
Page 37: Hcec Setup
• You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. • If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. • If [HCEC] is selected, you can use TVLink-HCEC Protocol. (For more detailed information, please refer to TVLink-HCEC Protocol document) •... -
Page 38: Clock Setup
Clock Setup (Depending on model) Mood Display Setup (Depending on model) • You can setup Mood Display features. Clock Display (Depending on model) • You can select ‘Enable’ or ‘Disable’ . • After selecting ‘Enable’ , you can see the LED Clock TV. Dimming Standby (Depending on model) •... -
Page 39: Welcome Video Mode
Welcome Video Mode (Depending on model) • You can set to Off, Once or Repeat. Operation • The video displays after your TV is turned on and the boot logo appears. • If Welcome Video is enabled and a video is downloaded on the TV, the video plays. •... -
Page 40: Portal Settings
TV Manager Password Protection • You can set password for protect access to TV Manager. • When TV Manager password protection is activated, the password is required for access to TV Manager. SW Update • You can update TV software by Network Software Update(NSU) server. Portal Settings (Depending on model) Portal Mode... -
Page 41: Website Shortcut
Website Shortcut (Depending on model) Shortcut • Sets Enable or Disable. When it is set to Enable, Website Shortcut app is displayed at launcher bar. Shortcut Name • You can set Website Shortcut app name (title). Shortcut URL • Sets URL to connect when excute Website Shortcut app. Shortcut Icon •... -
Page 42: Hotel Directory
Hotel Directory (Depending on model) • Set the information to display at Hotel Directory app. Facility or Service Name • Set the facility or service name. Details or Extension • Set the detailed information. Related Photo • You can select None, downloaded images or Download (Go to TV Manager). •... -
Page 43: Portal Manager
Portal Manager (Depending on model) This feature enables you to group together multiple monitor sets on a single network into the same group and copy portal setting data on a group basis. This feature has two modes, Master and Slave. Master •... - Page 44 Group Management • Creating a New Group Click Add New Group. Enter a group name. Click Add Device, select the devices you wish to add to the group, and add them. Click Done, and you will see that a new group has been created. •...
-
Page 45: Media Share
Media Share (Depending on model) SmartShare (Depending on model) • Smart Share enables DLNA function. If this value is enabled, TV acts as Media Player and displays Media Server contents through Smart Share app. Screen Share (Depending on model) • Screen Share enables WiFi p2p functions. If this value is enabled, Screen Share app is displayed at launcher bar and TV can display the screen of mobile phone or laptop. -
Page 46: Softap
SoftAP (Depending on model) • SoftAP is similar to Access Point. When this value is On, Wi-Fi Service application is displayed at the launcher bar. SoftAP is activated when user selects On in the Wi-Fi Service application. • Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model) Use Default •... -
Page 47: Beacon
Beacon (Depending on model) • This option enables BLE Beacon, one of Bluetooth 4.0’s features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The iBeacon/Eddystone Type Beacon features are supported. iBeacon • Beacon UUID (hex): Set the UUID. - Field1: 4byte hex value (8 digits) - Field2: 2byte hex value (4 digits) - Field3: 2byte hex value (4 digits) -
Page 48: Tv Manager
TV Manager * Image shown may differ from your TV. You can update files from USB to TV through the TV manager. Diagnostics (Depending on model) • Sets Enable or Disable. When it is set to Disable, user can’t control TV via RMS. The changed setting is applied after reboot. - Page 49 Ez Download • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Media files, Micom, Pro:Idiom M Key. (Depending on model) - Media files, Pro:Idiom M Key file and Software Update files should be copied into the folder named LG_DTV on the USB. »...
- Page 50 • Press button to display storage usage information. • Press the “CLEAR STORAGE” button to delete the downloaded media files.
- Page 51 Import Clone File • Once the internal TV data and its channel map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card. The user should not turn TV off nor unplug the USB memory card while processing. The following reference images might be slightly different.
- Page 52 Export Clone File • “Export Clone File” creates “TLL” file in USB root folder. “TLL” file can be used to “Import Clone File”. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different.
-
Page 53: Usb Download Menu
USB Download Menu USB Cloning An Installation can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Installation Menu settings, User A/V settings and the channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. - Page 54 Image Download * Image shown may differ from your TV. • The download sequence is Image Download Select Image(s) Download. • The target file is located in LG_DTV folders. • Press the “CLEAR STORAGE” button to delete the downloaded images. - Boot Logo Image (Depending on model) »...
- Page 55 Icon Download (Depending on model) • Images is located in LG_DTV folder. • If you updates the images, original images will be removed. • The download sequence is Icon Downalod Select Images DOWNLOAD. • Icon Image can download only one file. •...
- Page 56 Video Download (Depending on model) • Media files is located in LG_DTV folder. • The download sequence is Video Download Select media file DOWNLOAD. • Media files can only download one file each. • If you updates the video file, original file will be removed. •...
- Page 57 Software Update Update TV Software • This feature updates TV software through the EPK file in USB. • The target file is located in LG_DTV folder. • The download sequence is Software Update Update TV Software Select file(EPK) UPDATE. Update Micom Software •...
-
Page 58: Ir Codes
IR Codes • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button... -
Page 59: External Control Device Setup
External control device Phone jack Type Setup (TV) (PC) (Depending on model) • You need to purchase the phone-jack to RS-232C cable required for RS-232C IN the connection between the PC and the TV, which is specified in the (CONTROL & SERVICE) (PC) (TV) manual. -
Page 60: Rs-232C Configurations
• Baud rate: 9,600 bps (UART) automatically by IR receiver. • Data length: 8 bits • In this case, LG does not guarantee IR working function. • Parity : None • To make sure of this matter, here are two methods as •... -
Page 61: Command Reference List
Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) Transmission Data Command1 Command2 (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power 00 to 01 [Command1] : First command to control the TV. (j, k, m or x) 02. - Page 62 1 Power (Command: k a) 4 Volume Mute (Command: k e) ►To control Power On/Off of the set. ►To control volume mute on/off. You can also adjust mute using the mute button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Off...
- Page 63 8 Colour (Command: k i) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen colour. ►To lock the front panel controls on the monitor and remote control. You can also adjust colour in the picture settings. Transmission [k][m][ ][Set ID][ ][Data][Cr] Transmission [k][i][ ][Set ID][ ][Data][Cr]...
- Page 64 15 Energy Saving (Command: j q) 17 Equalizer (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalizer. Energy Saving in picture settings. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level Function...
- Page 65 19 Channel Skip/Add (Command: m b) 22 Input select (Command: x b) (Main Picture Input) ►To set skip status for the current Channel. ►To select input source for main picture. Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip Data Structure Data 01 : Add...
- Page 66 23 Channel(Programme) block/unblock (Command:m d) 24 Fail Over Mode (Command: m i) ►This command may work differently depending on model and ►Selects the Fail Over mode. signal. Transmission (m)(i)( )([Set ID])( )([Data])(Cr) ►For South Korea, North/Latin America except Colombia Model [Data] 00: Off Transmission [Data] 01: Auto...
- Page 67 26 Internal storage media contents play (Command: s n, a8) * Real data mapping ►Plays media stored in the internal memory. 00 : Step 0 ►This command may work differently depending on model and signal. Step 10 (Set ID 10) Transmission (s)(n)( )([Set ID])( )(a)(8)( )([Data])(Cr) Step 15 (Set ID 15)