National Approvals - Siemens SIMATIC NET SCALANCE W700 Series Reference Manual

Approvals for SCALANCE W780 / W740 802.11n

1.2 National approvals

NCC Warning Statement (Taiwan)
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the
power, or change the characteristics and functions of the original design of the certified lower
power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation
safety nor interfere a legal communication, if an interference is found, the service will be
suspended until improvement is made and the interference no longer exists.
1.2 National approvals
The following table lists the countries in which the SCALANCE W700 product is approved.
The diamond symbol (♦) identifies all countries for which there was no approval at the time
these operating instructions were written.
The current status of the approvals can be found on the Internet at the following address:
http://www.siemens.com/funkzulassungen
Column
Country
Mode
CH
MHz
PWR (EIRP)
Use
20
Meaning
Country
IEEE 802.11 standard and the TPC and / or DFS functionality, where required
Channel
Frequency
Maximum permitted effective isotropic radiated power
Permitted use indoors and / or outdoors
Approvals SCALANCE W700 802.11n
Reference Manual, 11/2014, C79000-G8976-C392-01