Table of Contents
Advertisement
BEFORE FIRST USE
Setting the time
If you have purchased a model fitted with an electronic
clock, you must set the time of day before you can
operate your appliance.
Electronic clock
•
After the appliance has been electrically connected,
"12.00" will be displayed and the
indicator
symbol
will flash.
•
To set the time of day, press the
or
symbols.
•
After 5 seconds from the last change, the
indicator symbol
will disappear, confirming the
time has been set.
NOTE: The clock has a 24-hour display.
Preparing your appliance for the first time
•
Please remove all internal boxes and bags from the
oven before operation.
•
Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the oven
is completely dry.
•
If your appliance is fitted with a mechanical "Auto
Off" timer, make sure it is set to "Off" marker for
manual operation.
6
BEFORE FIRST USE
CAUTION
WARNING
•
Do not line the oven with foil as it will damage
the enamel.
•
New appliances can have an odour during first use.
It is recommended to 'run in' the oven before cooking
for the first time. Operate the oven(s), empty, at a
temperature of 180°C for approximately 30 minutes.
For appliances with a separate grill, run grill on
maximum for 15 minutes WITH GRILL DOOR OPEN.
Please ensure that the room is well ventilated during
this process.
INSTALLING YOUR OVEN ACCESSORIES
Installing your oven accessories
Side racks
The side racks that come with your oven can be
attached to either side of your oven.
•
Insert the twin pegged side into the rear access holes
provided, ensuring the pegs are fully inserted.
•
Then locate the front peg into the front access hole
and push in firmly.
•
When locating the side racks into the small oven or
grill, ensure the left pegs go into the upper two holes.
Shelves and trays
TIPS & INFORMATION
IMPORTANT
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The
trays are designed the same way and fit straight into the
side racks.
•
Locate the rear edge of the shelf/tray in between
2 guide rails of the side rack - see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
•
With the front edge raised, begin to slide the shelf
into the oven.
•
Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
•
The grill/baking tray for separate grill wall oven
models slides into the wire runners in a similar
manner.
•
When fully inserted the shelf/tray should not interfere
with the closed oven door.
•
Remove extra trays and dishes before roasting or
baking.
•
To insert the grill tray in a separate grill underbench
product, open the grill door and fully extend the grill
drawer. Position the grill tray so that the slots on the
outer edges fit over the tabs on the slides.
WVG665
OVEN ACCESSORIES
7
Advertisement
Table of Contents
