Advertisement
3. If your ISP didn't provide you a username and password, click the
Advanced IP Configuration button. Configure your FR1000Z for
Internet access according to instructions provided by your ISP. Make
sure you enter the correct information.
When your Internet connection is set up correctly, the WAN and
INTERNET lights should be green.
Set Up a WPS Connection
Press the WPS button on the FR1000Z's front panel for more than 5
seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless network
using the WPS button.
8
Place the devices you want to connect
1
near one another.
2
Press the WPS button on the FR1000Z.
The WPS light blinks.
Press the WPS button on a compatible
3
device within 2 minutes of pressing the
button on the FR1000Z.
The WPS light on the FR1000Z shines
steadily when connected.
Advertisement
