Table of Contents
Advertisement
INSTALLATION OF INDOOR
8
CASE 2
- Install the unit leaning to a drainage hole side
as a figure for easy water drainage.
Position of console Bolt
- A place where the unit will be leveled and
that can support the weight of the unit.
- A place where the unit can withstand its vi-
bration.
- A place where service can be easily per-
formed.
M10 Nut
M10 SP. washer
M10 washer
M10 washer
M10 SP. washer
M10 Nut
Select and mark the position for fix-
ing bolts
- Drill the hole for set anchor on the face of
ceiling.
X 4
(Local
X 4
supply)
X 4
!
X 4
Tighten the nut and bolt to prevent unit
(Local
X 4
falling.
supply)
X 4
- Insert the set anchor and washer onto the
suspension bolts for locking the suspension
bolts on the ceiling.
- Mount the suspension bolts to the set an-
chor firmly.
- Secure the installation plates onto the sus-
pension bolts (adjust level roughly) using
nuts, washers and spring washers.
Old building
CAUTION
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
New building
Advertisement
Table of Contents
