Troubleshooting Tips - Prem-I-Air PMSF12 Series Owner's Manual

Troubleshooting tips

Malfunctions and Solutions
Stop the air conditioner immediately if one of the following faults occur. Disconnect the power
and contact the nearest customer service center.
OPERATION indicator or other indicators flash rapidly(5 times every second) and
this flash cannot be fixed by disconnecting the power, and then connect it again.
Trouble
Fuse blows frequently or circuit breaker trips frequently.
Other objects or water penetrate the air conditioner.
The remote controller won't work or works abnormally.
Other abnormal situations.
Malfunctions
Unit does not
Power cut
start
Unit may have become unplugged.
Fuse may have blown.
Battery in Remote controller may
have been exhausted.
The time you have set with timer
is incorrect.
Unit not cooling
Inappropriate temperature
or heating
setting.
(Cooling/ heating
models only)
Air filter is blocked.
room very well
Doors or Windows are open.
while air flowing
Air inlet or outlet of indoor or
out from the air
outdoor unit has been blocked.
conditioner
Compressor 3 minutes
protection has been activated.
If the trouble has not been corrected, please contact a local dealer or the nearest customer
service center. Be sure to inform them of the detailed malfunctions and unit model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorised service provider.
Get In Touch
Call: 0845 6880112
Email: info@adremit.co.uk
Cause
Check that plug is securely in wall
Wait or cancel timer setting.
Set temperature correctly. For
detailed method please refer to
"Using remote control" section.
Close the doors or windows.
12
Our Address
Puravent, Adremit Limited, Unit 5a, Commercial Yard,
Settle, North Yorkshire, BD24 9RH
What should be done?
Wait for power to be restored.
receptacle.
Replace the fuse.
Replace the battery.
Clean the air filter.
Clear obstructions away first, then
restart the unit.
Wait.