Table of Contents
Advertisement
Setting up Your px12-400r Network Storage
Naming Your px12-400r Network Storage
You can provide a meaningful name for your px12-400r using the Device Identification page. This page in
the px12-400r Management Console enables you to change the Storage Device Name, the Storage
Device Descriptive Name, and the Workgroup Name.
Change any of these by editing the text fields. Click Apply to save your changes.
Device Name: Enter a name for the px12-400r device. Use a name that will help you identify it on
●
your network.
Device Descriptive Name: Enter a descriptive name for the px12-400r device. This name can
●
provide additional detail that identifies the device. If you leave this field blank, the default device
name is used.
Workgroup Name: Enter a workgroup name for the px12-400r device if you need to change the
●
default name. The workgroup name identifies a group of computers that share information with
each other. Change the workgroup name only if you explicitly define a workgroup on your network.
Most users won't need to change the workgroup name, unless they have explicitly defined a
different workgroup on their other computers.
Renaming the px12-400r will require a device restart.
Setting up Active Directory
If your px12-400r supports Active Directory, you configure AD on the Device Identification page. Refer to
Configuring Your px12-400r for Active
10
Naming Your px12-400r Network Storage
Directory.
Advertisement
Table of Contents
